Concrete Dust Collectors, Vacuums, Pre-Separators from Ermator, Blastrac and Pullman Holt

This model provides 129 CFM and 100" of water life, making it ideal for use with small concrete hand grinders, drills, and other power tools up to 5" in blade diameter. Use this machine for cleanup in between concrete grinding passes or as a general construction vacuum.

This dust collector features dual 120-volt motors that provide extremely high suction. It delivers 258 CFM and 100 inches of water lift, which is more than enough power to handle any small to mid-size planetary floor grinder as well as handheld tools.

This model features three large, commercial-grade motors and provides 353 CFM and 100" of water lift, making it ideal for use with small to mid-size planetary floor grinders, all hand tools, and small walk-behind saws.

Job sites with no or limited electrical power aren’t a problem for this propane-powered dust collector. It features an 11 HP Honda motor that provides 285 CFM and 125” of water lift. It’s the strongest unit in its class!

The Ermator S1400 is designed for efficient, fast recovery of bulk dry dust. With new features, such as vacuum equalization and a transparent housing around the Longopac bag, the S1400 will quickly become your new preferred dust collector on concrete and construction jobs.

With its powerful 8.0 HP motor, the T4000 produces 280 CFM and 125” of water lift. The T4000 is a powerful dust extractor capable of recovering fine dust created during building, grinding, plastering, and construction activities.

The T4000 Gas is a powerful dust collector with high suction that is suitable for use with all mid-sized grinders, scarifiers, saws, and shot blasters. It features a powerful dust separator to handle a variety of dust, plus it also meets asbestos requirements.

The T7500 provides 353 CFM and 110" of water lift, and exceeds the requirements of all large 230V three-phase grinders. It features two HEPA filters, Jet Pulse® filter cleaning technology, and Longopac drop-down dust-free disposal. Includes an integrally mounted power receptacle.

The T7500 provides 353 CFM and 110" of water lift, and exceeds the requirements of all large 230V three-phase grinders. It features two HEPA filters, Jet Pulse® filter cleaning technology, and Longopac drop-down dust-free disposal.

Featuring a powerful 11 HP motor fueled by regular unleaded gas, the T7500 Gas delivers 410 CFM and 115 inches of water lift. This unit is ideal for use with mid-size and large grinding equipment, scarifiers, shot blasters, and floor grinders.

The T8600 provides 353 CFM and 110" of water lift. This 480V, 3-phase dust collector exceeds the requirements of the most demanding thread-head grinders. It also features Jet Pulse® filter cleaning technology and Longopac dust disposal.

Job sites with no or limited electrical power aren’t a problem for this propane-powered dust collector. It features an 18 HP Honda motor that provides 410 CFM and 115” of water lift, giving you enough power to keep up with big 3-head grinders on tough jobs.

The T8600R features a quiet, yet powerful turbine motor that delivers 353 CFM of airflow, making it suitable for use with a wide variety of grinders. In fact, the T8600R is packed with so much power, it exceeds the requirements of the most demanding three-head grinders!

Packed with power and plenty of filter area, the T10000 easily keeps up with the most demanding three-head grinders on the market today. It provides 480 CFM, 120" of water lift, and convenient drop-down Longopac dust disposal. For best results, pair with the Ermator C5500 Pre-Separator.

Talk about powerful! This 230V HEPA dust extractor can handle a single four-head grinder or two 3-head grinders! It features a powerful 16 HP motor that produces 647 CFM and 140" of water lift.

This 480V HEPA dust extractor can handle a single four-head grinder or two 3-head grinders! It features a powerful 18 HP motor that produces 710 CFM and 140" of water lift.

The C1300 is designed to work with most small to medium dust collectors, boosting their performance so you can grind longer without interruption. It captures 90% of collected material before it reaches your dust collector filter, preventing those frustrating clogs.

The C3000 captures 90% of the material before it reaches your dust collector, keeping dust extractor filters clean and extending the grinding operation with fewer interruptions.

Enjoy fewer interruptions and longer-lasting filters with the C5500 Pre-Separator! It captures 90% of heavy dust and debris before it reaches your dust collector, dramatically boosting your job productivity.

For those big, messy cleanups on concrete resurfacing jobs, the Ermator W70P is your go-to tool. The oil-cooled pump can handle concrete sludge, oils, and cutting fluids without choking or overheating.

The Ermator W2000/2 Wet Vacuum with Pre-Separator allows operators to re-use collected wastewater during grinding, saw cutting, and coring jobs. The W2000/2 reduces costs associated with hauling water and disposing of slurry.

Designed for professional cleaning in abatement, restoration, and construction job sites, the model 45 HEPA-D Dry Vacuum is compact and portable. It also meets the latest EPA regulations for recovering lead dust. Includes a full assortment of attachments.

The 102ASB is specifically designed to handle the roughest abatement, remediation, and restoration work you can throw at it. You get HEPA filtration, a tight air gasket seal, and the most efficient recovery of dust and debris on any job site.

The Ermator S50 is a compact, single-motor wet/dry vacuum that is specifically designed to work with a power tool (up to 1,800 watts). The tank holds up to 14 gallons and can accept a bag for safer, dust-free emptying of the vacuum.