Ermator T7500 HEPA Three‑Phase Dust Extractor, 230V
- No Distribution Box
- Ideal for use with all large 230V three-phase grinders
- 230V, 3 phase; 24.2 amps
- 353 CFM; 110" of water lift
- Jet Pulse® filter cleaning technology
- Longopac drop-down dust disposal
Need a dust collector that can keep up with your 230V, 3-phase grinder?
The Ermator T7500 HEPA model from Ermator is the right match!
Ideal for Any Hand tools, Walk-Behind Tools, Saws, or Grinders
The T7500 provides 353 CFM and 110" of water lift, and exceeds the requirements of all large 230V three-phase grinders, including but not limited to:
- Scanmaskin 450, 450NS, 500PD, 650
- Husqvarna PG530
- LAVINA 20N-S, 20-S, 30L, 30L-3
- Prep-Master STI2807, STI3030, STI4430
HEPA Filtration for Improved Indoor Air Quality
The T7500 features two oversized independently tested and certified HEPA filters, each rated at 99.99% efficiency at 0.3 microns. This model features a 20% increased filter area for improved performance.
This model also features Teflon-coated sock-style pre-filters that provide 25 sq ft of surface area for nonstop grinding and long service life.
In addition, the sealed cyclonic chamber separates and removes larger dust particles from the airstream before the air enters the pre-filter socks preventing premature filter loading.
Dust-Free Filter Cleaning with Jet Pulse® Technology
Like all Ermator dust extractors, this model features the JetPulse® filter cleaning system for dust-free cleaning of the filter. This unique system efficiently purges the pre-filter within the closed vacuum—there's no need to open the machine and create a dust hazard.
Mess-Free Dust Disposal
The T7500 includes a 70’ Longopac bagging system for fast, drop-down, dust-free disposal into as many as 25 individually sealed plastic bags. The steel frame of the T7500 also includes a Longopac platform, which supports the weight of filled bags and makes it easy to slide them onto a wood pallet.
Compliant with OSHA's Respirable Crystalline Dust Standards!
Complying with OSHA's new respirable crystalline dust standards (29 CFR 1910.1953) is easy with Ermator! This high-performing unit meets OSHA's dust collector requirements and helps provide a cleaner, healthier work site.
From its steel frame to its wear-resistant pre-filter hoses, the T7500 is built to withstand the roughest jobs. The commercial-grade turbine motor features twin mufflers and integrally cast heat sinks. Not only is it exceptionally quiet, but it runs cooler for extremely long service life.
The T7500 rolls around the job site with ease thanks to is pneumatic tires and 4-inch casters with brakes. This unit is stable, balanced, and highly maneuverable.
This model is also 8” shorter than its predecessor, the T75, making transportation easier and more convenient when loading/unloading from a vehicle.
Tool Kit includes:
- 3" Hose Assembly (33 ft)
- 2” Hose Assembly (25 ft)
- 2-Piece Wand (2 in x 5 in)
- Floor Tool (2 in x 14.5 in)
- CFM: 353
- HP: 10.4
- Amps: 24.2
- Volt: 230, 3 phase
- Water lift: 110"
- Weight: 548 lbs
- Hose inlet: 3"
|Category||Concrete Dust Collector Vacuums, Dust Containment, HEPA Vacuums|
|Warranty Information||All Ermator devices and accessories have a 12-month factory warranty for material and manufacturing defects. When returning the attached warranty slip, the warranty extends to 36 months. Do not attempt to repair the suction apparatus without the consent of the manufacturer. The warranty does not cover defects which are the result of normal wear and tear, negligence, defective use, unauthorized repair or the suction apparatus being connected to the incorrect voltage. In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or our authorized representative for warranty examination and for any warranty repair or replacement.|
|Manufacturer Model Number||200600404A|