Please select a Shopping List

Fungicidal and Mold Resistant Coatings, Encapsulants and Sealers

View as List Grid

Items 1-24 of 72

Page
per page
Set Descending Direction
  1. Concrobium® Mold Control
    Concrobium® Mold Control

    Concrobium Mold Control is a dual purpose, non-toxic antimicrobial that can be deployed during the “knock down” phases of restoration projects to control mold spore proliferation, and it can also be applied on restored surfaces for ongoing mold protection.

    • Dual-purpose formula remediates and prevents mold
    • EPA registered for use on hard surfaces and fabrics
    • No bleach, ammonia, or VOCs
    • Category IV rating—requires no PPE to apply

    Starting at $39.99

  2. Fiberlock AfterShock Fungicidal Coating
    Fiberlock AfterShock Fungicidal Coating

    AfterShock is an EPA-registered antimicrobial coating designed to kill residual mold and mildew remaining after pre-cleaning contaminated surfaces. AfterShock also inhibits the future growth and spread of mold and mildew on the cured film surface.

    • For use on interior surfaces
    • Durable and easy to apply
    • EPA-registered (EPA Reg No: 73884-1)
    • 10 year warranty
    • Kills and prevents mold and mildew

    Starting at $75.69

  3. SENTINEL 24‑7 Zero Mold & Mildew Resistant Coating, White
    SENTINEL 24‑7 Zero Mold & Mildew Resistant Coating, White

    SENTINEL 24-7 ZERO is a high-quality interior-grade coating that contains no VOCs, is free of Hazardous Air Pollutants (HAPs), and o­ffers virtually no odor. It is designed to inhibit the growth of stain- and odor-causing mold, mildew, and other microorganisms on cured coating surfaces.

    • Available in white or clear
    • No VOCs, no HAPs, low odor
    • Contains antimicrobial protection
    • Coverage: 80–400 sq ft per gallon
    • Meets requirements for LEED® EQ Credit 4.2 for low-emission materials, paints, and coatings

    Starting at $217.36

  4. SENTINEL 24‑7 Zero Mold & Mildew Resistant Coating, Clear
    SENTINEL 24‑7 Zero Mold & Mildew Resistant Coating, Clear

    SENTINEL 24-7 ZERO is a high-quality interior-grade coating that contains no VOCs, is free of Hazardous Air Pollutants (HAPs), and o­ffers virtually no odor. It is designed to inhibit the growth of stain- and odor-causing mold, mildew, and other microorganisms on cured coating surfaces.

    • Available in white or clear
    • No VOCs, no HAPs, low odor
    • Contains antimicrobial protection
    • Coverage: 80–400 sq ft per gallon
    • Meets requirements for LEED® EQ Credit 4.2 for low-emission materials, paints, and coatings

    Starting at $216.24

  5. EnviroShield Mold Resistant Coating, White (5 GL)
    EnviroShield Mold Resistant Coating, White (5 GL)

    EnviroShield Mold Resistant Coatings are designed for restoration professionals and certified applicators to combat mold and mildew. This premium coating is formulated with an advanced biocide blend that provides effective protection from mold and mildew on the dried paint film.

    • Coverage up to 400 sq ft per gallon
    • Easy cleanup
    • Goes on white, dries white
    • Dries quickly (Less than 30 min)
    • 10-year warranty
  6. EnviroShield Mold Resistant Coating, Clear (5 GL)
    EnviroShield Mold Resistant Coating, Clear (5 GL)

    EnviroShield Mold Resistant Coatings are designed for restoration professionals and certified applicators to combat mold and mildew. This premium coating is formulated with an advanced biocide blend that provides effective protection from mold and mildew on the dried paint film.

    • Coverage up to 400 sq ft per gallon
    • Easy cleanup
    • Clear
    • Dries quickly (Less than 30 min)
    • 10-year warranty
  7. EnviroShield Odor and Stain Blocker, White (5 GL)
    EnviroShield Odor and Stain Blocker, White (5 GL)

    EnviroShield Odor & Stain Blocker permanently blocks stains and seals in tough deeply embedded odors. This white coating is designed for restoration professionals and certified applicators to be used for sealing in smoke odors from fire damage.

    • Permanently blocks stains and seals in odors
    • Low odor and low VOC
    • White
    • 30-minute dry time
    • Interior application
  8. EnviroShield Odor and Stain Blocker, Clear (5 GL)
    EnviroShield Odor and Stain Blocker, Clear (5 GL)

    EnviroShield Odor & Stain Blocker permanently blocks stains and seals in tough deeply embedded odors. This clear coating is designed for restoration professionals and certified applicators to be used for sealing in smoke odors from fire damage.

    • Permanently blocks stains and seals in odors
    • Low odor and low VOC
    • Clear
    • 30 minute dry time
    • Interior application
  9. EnviroShield Shellac 9000 Stain and Odor Blocker (5 GL)
    EnviroShield Shellac 9000 Stain and Odor Blocker (5 GL)

    Chosen by professionals for fire and water damage restoration, EnviroShield Shellac 9000 is the ultimate odor and stain blocker. It permanently blocks severe stains and creates a barrier against odors.

    • Coverage up to 500 sq ft per gallon
    • Shellac base
    • White
    • 45 minute dry time
    • Interior/spot exterior application
  10. EnviroShield Masonry 3000 Waterproofer (5 GL)
    EnviroShield Masonry 3000 Waterproofer (5 GL)
    EnviroShield Masonry 3000 Waterproof coating makes it so water can't penetrate. Use it on interior or exterior floors, vertical or horizontal concrete, or block and cast-in-place concrete.
    • Forms impermeable barrier to water
    • 15 year waterproof guarantee
    • 10 year mold and mildew guarantee
    • Interior/exterior application
    • Coverage: 95-115 sq ft per gallon
  11. EnviroShield Oil Base 7000 Stain and Odor Sealer (5 GL)
    EnviroShield Oil Base 7000 Stain and Odor Sealer (5 GL)

    EnviroShield Oil Base 7000 is formulated for whole-surface interior priming. The premium blended high-solids formula combines outstanding adhesion, reliable stain-blocking, and effective odor sealing performance characteristics making it an exceptional product for fire and water damage restoration.

    • One Coat will block stains from water, soot, smoke, nicotine, rust and mildew
    • Seals stains and odors from smoke and fire damage
    • Coverage: 300-500 sq ft per gallon
    • White
    • 40-minute dry time
    • Interior application
  12. EnviroShield Odor and Stain Blocker with Turbo Spray System, 26 oz
    EnviroShield Odor and Stain Blocker with Turbo Spray System, 26 oz
    EnviroShield Odor & Stain Blocker is designed for professionals and certified applicators to permanently encapsulate odors from fire, smoke, animals, nicotine and mildew. In addition, the white formula effectively covers and blocks difficult stains.
    • Turbo Spray System®
    • 4x greater output than traditional spray primers
    • 10” wide spray pattern for fast coverage
    • 26 oz. can be optimized for large projects

    Starting at $17.44

  13. SENTINEL Lead Encapsulant, White (5 GL)
    SENTINEL Lead Encapsulant, White (5 GL)
    SENTINEL Lead Encapsulant is an interior/exterior, water-based, zero VOC, low-odor coating designed as a permanent solution for abatement of lead-based paint.
    • White finish
    • Zero VOC
    • Can be applied by brush, roller, or airless paint sprayer
    • Coverage: 165 sq ft per gallon
  14. Fiberlock IAQ 6000 Coating
    Fiberlock IAQ 6000 Mold Resistant Coating (5 GL)

    Fiberlock IAQ 6000 is an extremely durable coating developed to withstand moist, humid conditions that provide the ideal environment for fungal growth. This 100% acrylic coating offers durability in combination with excellent mold resistance.

    • Coverage (smooth): 250-400 sq ft per gallon
    • Coverage (porous): 150-300 sq ft per gallon
    • Goes on white, dries white
    • Contains EPA-registered antimicrobials
    • 10 year warranty
  15. Fiberlock IAQ 6000 GEN3 (formerly ZERO Mold‑Resistant Coating) (5 GL)
    Fiberlock IAQ 6000 GEN3 (formerly ZERO Mold‑Resistant Coating) (5 GL)

    IAQ 6000 GEN3 is formulated with a unique fungistatic agent to resist mold growth on the dry coating surface. This durable, flexible, and permeable acrylic water-based coating is ideal for use on wood, plaster, sheetrock, and other building materials.

    • Highest mold-resistance rating
    • Tested by independent laboratories
    • White (tintable)
    • VOC compliant in US and Canada
    • Coverage: 150–400 sq ft/gal (depending on surface conditions)
  16. Fiberlock IAQ 6040 Mold Resistant Sealant (5 GL)
    Fiberlock IAQ 6040 Mold Resistant Sealant (5 GL)

    IAQ 6040 is a low-viscosity, translucent violet sealant designed to seal new construction materials and resist fungal growth. This water-based coating contains a fungistatic agent to resist mold growth on the dry coating surface.

    • Coverage: 200–450 sq ft per gallon
    • Translucent violet finish
    • Complies with the requirements for LEED® EQ Credit 4.2
    • Contains EPA-registered anti-microbials
    • 10 year warranty
    $272.99 $272.99 Add to cart to see price
  17. Fiberlock IAQ 6100 Mold Resistant Clear Coating
    Fiberlock IAQ 6100 Mold Resistant Clear Coating (5 GL)

    IAQ 6100 is a clear mold-resistant coating for professional use that contains an EPA-registered, broad-spectrum fungicide to prevent mold growth on the surface of the cured film.

    • Coverage (smooth): 250–400 sq ft per gallon
    • Coverage (porous) 150–300 sq ft per gallon
    • Goes on white, dries clear
    • Contains EPA-registered antimicrobials
    • 10-year warranty
    • Qualifies for LEED® EQ Credit 4.2
  18. SurfaceShield Protectant RTU (5 GL)
    SurfaceShield Protectant RTU (5 GL)

    SurfaceShield is a new class of penetrating barrier that blocks the nutrients that promote mold and mildew growth from reaching a material’s surface*. It also contains an EPA-registered preservative to inhibit the growth of mold and mildew on the dry surface coating.

    • Protects against future mold and mildew
    • Great on OSB, plywood, brick, and wallboard
    • pH: 8.2
    • Ready to use
    • Coverage: 250–1,000 sq ft per gallon
  19. Foster® 40‑20™ Fungicidal Protective Coating (5 GL)
    Foster® 40‑20™ Fungicidal Protective Coating (5 GL)

    Foster Continuous Defense 40-20 Fungicidal Protective Coating is EPA registered and the industry's leading coating. It is formulated to prevent the spread of mold and bacteria in areas such as walls, ceilings, interior and HVAC ducting.

    • Coverage: 80 sq ft per gallon
    • Goes on white, dries white
    • EPA-registered coating
    • 10 year warranty
    • Complies with the requirements for LEED® EQ Credit 4.2
  20. Foster® Full Defense™ 40‑25 Fungicidal Protective Coating (5 GL)
    Foster® Full Defense™ 40‑25 Fungicidal Protective Coating (5 GL)

    Foster Full Defense Fungicidal Protective Coating (40-25) kills residual mold and mildew and protects the surface of unfinished wood, drywall, oriented strand board, metal, masonry, and other building materials from fungal growth.

    • Coverage: 300 sq ft per gallon
    • Goes on white, dries white
    • EPA-registered (EPA Reg No: 63836-2)
    • 10 year warranty
    • Complies with the requirements for LEED® EQ Credit 4.2
  21. Foster® Interior Defense™ 40‑50 Mold Resistant Coating (5 GL)
    Foster® Interior Defense™ 40‑50 Mold Resistant Coating (5 GL)

    Foster Interior Defense 40-50 Mold Resistant Coating is a high-quality, low-viscosity mold-resistant coating. It provides ideal protection of its surface in areas prone to mold growth.

    • Coverage: 300 sq ft per gallon
    • Goes on white, dries white
    • Contains EPA-registered antimicrobials
    • 5 year warranty
    • Complies with the requirements for LEED® EQ Credit 4.2
  22. Foster® Sheer Defense™ 40‑51 Mold Resistant Clear Coat (5 GL)
    Foster® Sheer Defense™ 40‑51 Mold Resistant Clear Coat (5 GL)

    Foster Sheer Defense 40-51 is designed as a clear coat for a long-term protection against mold, mildew and other odor-causing bacteria.

    • Coverage (wood): 250-450 sq ft per gallon
    • Coverage (nonporous): 500-600 sq ft per gallon
    • Goes on white, dries clear
    • Contains EPA-registered antimicrobials
    • 5 year warranty
    • Complies with the requirements for LEED® EQ Credit 4.2
  23. Bad Axe Wicked White, Mold Resistant Coating, White (5 GL)
    Bad Axe Wicked White, Mold Resistant Coating, White (5 GL)

    Wicked White is a thick, interior-grade mold-resistant coating designed for use on porous surfaces, such as wood, sheetrock, concrete, and more. It inhibits the growth of stain- and odor-causing mold, mildew, algae, and other microorganisms on the coating surface. Dries white.

    • Breathable film seals out moisture
    • Manufactured with antimicrobial ingredients
    • pH: 7.2–9.5
    • Dries white
    • Ready to use
  24. Bad Axe Klar Coat, Mold Resistant Coating, Clear (5 GL)
    Bad Axe Klar Coat, Mold Resistant Coating, Clear (5 GL)

    Klar Coat is a thick, interior-grade mold-resistant coating designed for use on porous surfaces, such as wood, sheetrock, concrete, and more. It inhibits the growth of stain- and odor-causing mold, mildew, algae, and other microorganisms on the coating surface. Dries clear.

    • Breathable film seals out moisture
    • Manufactured with antimicrobial ingredients
    • pH: 7.2–9.5
    • Dries clear
    • Ready to use
View as List Grid

Items 1-24 of 72

Page
per page
Set Descending Direction

Recommended For You