Jon-Don proudly offers the widest selection of air movers and fans in the industry. No matter what the application—water damage restoration, carpet or hard floor drying, air circulation, ventilation, or cooling—you can find the right air mover at a great price.
Items 1-24 of 55
You would have to look hard to find a feature missing from this air mover! You get a powerful 0.4 HP motor, 2 run speeds, stackable design for storage and transport ease, plus shock-absorbing polyethylene housing for corrosion reduction. The Tempest tilts at both 45- and 90-degree angles for fast drying.
The Typhoon offers a powerful 0.4 HP motor with 3 run speeds for all your drying challenges. Best of all, it only draws 3.0 amps! The two onboard GFCI outlets let you daisy chain multiple air movers, so you don't have to search for extra outlets. Just plug two fans into the Typhoon to eliminate the need for extension cords and power blocks.
The Typhoon offers a powerful 0.4 HP motor with 3 run speeds for all your drying challenges. Best of all, it only draws 3 amps! The two onboard GFCI outlets let you daisy chain multiple air movers, so you don't have to search for extra outlets.
Designed after extensive research, the Force 9 covers huge drying areas, while its unique daisy chain feature connects up to 5 units to one outlet, drying up to 80 feet. This 2-speed air mover can be stacked for both storage and operation.
Designed after extensive research, the Force 9 covers huge drying areas, while its unique daisy chain feature connects 5 units to one outlet, drying up to 80 feet.
An industry standard-bearer, Gale Force is a best-selling air mover offering 68% more airflow, 2 speeds, all while drawing only 2.5 amps. Up to 6 units can be daisy-chained together to run on a 15-amp circuit, boosting your drying power. A 5-point motor mount protects this unit for the long haul.
This compact air mover produces the largest drying area possible while taking up half the space of traditional snail shells and drawing just 1.9 amps! It's so light, a single tech can carry up to 4 units at once or up to 6 on a hand truck!
The Velo Pro features the same space-saving design as the original Velo PLUS variable speed control and digital amp readout, allowing you to fine-tune the unit to one-tenth amp increments to maximize every circuit. With 5 operating positions, drying floors, walls, stairs, or crawlspaces has never been easier!
The Dri-Pod accelerates drying by pulling warm, dry air from above and directing it downward in a high-velocity 360° pattern drying up to 10 feet across in all directions. Talk about efficiency—you can set up the Dri-Pod in one room while you move on to the next!
Professional restorers will find everything they need in the Sahara Pro X3: lower amp draw, 3 speeds, daisy chain capability, plus legendary Dri-Eaz durability and reliability.
Why force your customers to walk around on soggy carpet after you leave? Get the AirPath from Dri-Eaz and leave dry carpets and floors behind on every job! It produces high-velocity 40 MPH airflow in a uniform 360° pattern across the floor.
The Dry Air 12” Axial Fan is a high-pressure, high-velocity air mover. It features a powerful 1 HP motor that pulls 7.1 amps and operates on a single speed. The aerodynamic design of this axial fan yields very high airflow rates from a compact, lightweight package.
Increase your on-site power by 68% with the only air mover designed for contaminated job sites. Clean Force means on-site wash-downs and motor/housing designs that translate to lightning-fast disassembly and decontamination.
The MAX Force delivers maximum air to tackle the toughest jobs. Designed to push large volumes of air through ducting, the MAX Force can ventilate and dry out the hardest-to-reach places quickly and easily.
The AirWolf provides an unbeatable combination of powerful CFM and strong static pressure. Optimized for use with the Dri-Eaz WolfPack hardwood floor drying system, this combo dries wood floors from the bottom out and can help avoid costly repair bills.
Two-speed, low amp power, efficiency, and versatility! The Ace Turbo Dryer from Dri-Eaz attacks water damage from every angle. With seven different operating positions to choose from, the Ace locks on target no matter what the job.
Aerodynamically designed for the highest velocity airflow at 3,200 CFM, the Jet's built-in angles maximize laminar airflow along the floor. Its focused vanes channel extra velocity in all the right places.
The Sahara HD TurboDryer from Dri-Eaz gives professional restoration contractors the static pressure needed to power through specialty drying challenges, such as drying in walls, underneath cabinets, and inside crawlspaces.
The Phoenix FOCUS Axial Air Mover produces airflow velocities of 3,000 CFM while using less than 2.5 amps of electricity on high speed. Not only that, but it also focuses the velocities on hard-to-dry areas, such as carpet and pad, sub-floor, and walls, delivering superior drying results over up to 23.5 feet.
Low amp draw, balanced airflow, and maximum velocities of 2,800 FPM are the foundation on which the Phoenix CAM Pro Centrifugal Air Mover is built, along with a stackable body durable enough to stand up to the rigors of the restoration industry.
The Direct-It “IN” Universal Air Mover Adapter gives you the ability to dry critically damaged areas fast! This handy accessory attaches to most standard centrifugal air movers, and allows you to direct air in as many as 17 different locations and dry up to 22 feet!
The Water Separator works to protect your HP 60 blower by preventing bulk water from passing through it when drying in a negative mode.
If you're tired of having Vac-Panels laying all over the place, then this heavy duty nylon carry bag is for you. Capable of carrying 10 Vac-It Panels.
HP60 Plus base unit with air out and air in main hoses