Please select a Shopping List
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Injectidry HP‑PLUS Floor Drying Package

Item #
OE-HPPLSFDP-EA
Each    Qty: 1
Send to a Friend Add to My Shopping List
  • Draws less than 12 amps—no matter the setup
  • CUL and ETL listed
  • Can be used with original HP60 attachment and hoses
  • Easier setup; no pressure relief valve to worry about
$3,999.08

For large quantity orders please call for pricing 1.800.400.9473

Description

Product Information

The HP-PLUS Floor Drying Package is the improved version of Injectidry's HP60i Floor Drying package. This unit is quieter (less than 60 dB), more powerful, and easier to set up than the original. You can use up to 12 Multi-Port or 20 8-Port Vac-It panels with an increase up to 30% in drying capabilities. 

 

There are no breaker tripping problems (unless the breaker is faulty or you have too much equipment on the circuit). The unit's amperage will never exceed 12 amps.

 

The HP-PLUS also gives you consistent pressure with no need for pressure relief valves. It will automatically adjust to maximum airflow whether you're using 1 or 20 Vac-It panels.

 

The HP-PLUS Floor Drying Package comes complete with the following:

 

  • 1 - HP-PLUS Unit (OE-HPPBO-EA)
  • 1 - Power Cord (MP-MC143-EA)
  • 1 - Main Air IN hose with 2" cuff
  • 1 - Main Air OUT hose
  • 1 - Silencer (OE-IDS60SIL-EA)
  • 1 - Water separator (OE-IDS60WS-EA)
  • 1 - 3/8" x 200' Safety Yellow Tubing (OE-RH05A-EA)
  • 1 - 10" x 30" Clear Panel (OE-SPLPCLR-EA)
  • 5 - Slim Panels - small ports (OE-IVISLIM9-EA)
  • 3 - Multi-Port Panels (OE-IVIPSP5-EA)
  • 6 - 7" x 30" extra-slim, small point vac-it panels (OE-XSP10-EA)
  • 1 - Large 8-Point Panel (OE-IVIPP-EA)
  • 50 - ID soft (red) nipple caps (OE-RP2-EA)
  • 4 - Quick Connect Panel T's (OE-VACT-EA)
  • 1 - Carry Bag (OE-ICB-EA)
  • 10 - Endcap Plugs (OE-IDQCEP01-CS)
  • 1 - 1.5" x 50' Safety Yellow Blank Hose (MP-IDPL03-EA)
  • 1 - Rolling Duffle Bag (OE-DB-EA)
  • 30 - Quick Connect 1.5" Hosecuffs (MP-HC3-EA)
  • 9 - Quick Connect Inline Manifolds (MP-QCM01-EA)
  • 2 - Small Y' (MP-QCY-EA)
  • 4 - 1.25" Hose connectors (MP-IDQCC01-EA)
  • 1 - Truck mount extraction connector
  • 1 - Main W (to be used with HB300)
Specs

Specifications

More Information
Amps Under 12
Category Floor and Cavity Drying
Brand Injectidry
Volts 110/120
Color Gray
Operating Speeds Variable
Condition New
Video

Video

Manual / Schematic
Related Products

Customers Also Viewed