Power Supply Distribution

This Generac portable generator is ideal for use on construction jobs, concrete surface prep jobs, or for use as a backup residential power source in case of power outages. It has enough power to start many 5-ton air condition units, plus it can provide power for up to 16 circuits.

"The Box" Portable Power Distribution Center from CEP allows you to plug into a 220-volt electric range or dryer outlet and split the power into six 20-amp GFCI outlets ready to run your air movers, dehumidifiers and drying equipment.

The Temporary Power Distribution Box provides two separate 20-amp GFCI-protected circuits. It is ideal for use on job sites with very little available power. It easily connects to a 220V, 30-amp dryer outlet to break the power down into two usable 20-amp, 125V circuits.

The Mini Single Phase (Spider) Power Box is the ideal "mini" power source for helping you run extra equipment on the job site. It features four 20-amp circuits, which provides up to 80 amps of 120-volt power!

This 230-volt, three-phase power cord is best utilized with the Scanmaskin 500, 650, and 800 three-phase floor grinders. It is also compatible with three-phase Ermator dust collectors.

The 480-volt, three-phase power cord is best utilized with the Scanmaskin 650, 700RC, 800, and 1000RC three-phase floor grinders. The 6/4 STOW cord comes with 8165 male and 8164 female connectors.

This 230-volt, single-phase power cord is best utilized with the Scanmaskin 18, 330, 450, 500, and 650 single-phase floor grinders. The 10/3 SOW cord comes with NEMA L6-30 connectors on each end.

The Quick 220 System was designed to give you more flexibility on your grinding jobs by letting you connect your 110–240 volt equipment to ordinary 110–120 volt commercial-grade outlets. There's no need for a dedicated line or to deal with the heat and hassle of a step-up transformer.

This plug is designed for harsh usage in professional settings. This male plug is mounted (terminated) on a power cord and interfaces with either a female connector, wall receptacle, or female outlet.

This heavy-duty, industrial-grade plug is designed for professional use.

Hubbell twist-lock 3P-4W 250V 30A Male Plug

Hubbell twist-lock connector body. 50A 250V 3-Phase Female Connector

Hubbell twist-lock plug. 480V/3-Phase 50-Amp Plug

Hubbell twist-lock connector body. 480V/3 Phase 20 AMP 3 Pole/4 Wire

Plug 50A 600V AC 250V DC Hubbell No Pin

This male locking inlet is typically panel-mounted on the piece of equipment receiving the power.

This high-quality, industrial-grade locking receptacle features pins arrayed in a circular manner. The plug is inserted into the receptacle and twisted to lock in place.

The SEOW Black Power Distribution Cord is ideal for use with Portable Power Centers. It is approved for outdoor applications and submersion in water. Sold per foot, must specify length by quantity.

This 2' Power Cord Adapter connects the Portable Power Center Power Cord (MP-6425-EA) or the Mini Power Center (MP-99577-EA) to a 3-wire, 30-amp (older code dryer outlet) receptacle.

This 10' Power Cord Adapter connects the Portable Power Center Power Cord (MP-6425-EA) or the Mini Power Center (MP-TPPCMINI-EA) to a 4-wire, 50-amp (current code range outlet) receptacle.

This 10' Power Cord Adapter connects the Portable Power Center Power Cord (MP-6425-EA) or the Mini Power Center (MP-TPPCMINI-EA) to a 4-wire, 30-amp (current code dryer outlet) receptacle.

This is the main power cord for the Portable Power Distribution Panel (MP-TPPC-EA). It is used with the power cord adapters (sold separately) to provide power for the distribution panel.

This 10' Power Cord Adapter connects the Portable Power Center Power Cord (MP-6425-EA) or the Mini Power Center (MP-TPPCMINI-EA) directly to the circuit panel. (Electrician Needed).

This 2' Power Cord Adapter connects the Portable Power Center Power Cord (MP-6425-EA) or the Mini Power Center (MP-99577-EA) to a 3-wire, 50-amp (older code range outlet) receptacle.