Dust Collection Systems and Extractors from Ermator

The Metabo ASR35 ACP is a powerful, compact wet/dry vac designed for the removal of liquids as well as concrete and rock dust on construction and resurfacing jobs. This 10.2-amp vacuum provides 130 CFM for the most challenging job sites.

Featuring a powerful 11 HP motor fueled by regular unleaded gas, the T7500 Gas delivers 410 CFM and 115 inches of water lift. This unit is ideal for use with mid-size and large grinding equipment, scarifiers, shot blasters, and floor grinders.

The T4000 Gas is a powerful dust collector with high suction that is suitable for use with all mid-sized grinders, scarifiers, saws, and shot blasters. It features a powerful dust separator to handle a variety of dust, plus it also meets asbestos requirements.

Job sites with no or limited electrical power aren’t a problem for this propane-powered dust collector. It features an 11 HP Honda motor that provides 285 CFM and 125” of water lift. It’s the strongest unit in its class!

This dust collector features dual 120-volt motors that provide extremely high suction. It delivers 258 CFM and 100 inches of water lift, which is more than enough power to handle any small to mid-size planetary floor grinder as well as handheld tools.

This model features three large, commercial-grade motors and provides 353 CFM and 100" of water lift, making it ideal for use with small to mid-size planetary floor grinders, all hand tools, and small walk-behind saws.

The wet/dry vac that concrete flooring professionals have been asking for! The Ermator S25 Wet/Dry HEPA vac is a compact, single-motor wet/dry vacuum that is specifically designed to work with a power tool (up to 1,800 watts).

This model provides 129 CFM and 100" of water life, making it ideal for use with small concrete hand grinders, drills, and other power tools up to 5" in blade diameter. Use this machine for cleanup in between concrete grinding passes or as a general construction vacuum.

The Ermator S1400 is designed for efficient, fast recovery of bulk dry dust. With new features, such as vacuum equalization and a transparent housing around the Longopac bag, the S1400 will quickly become your new preferred dust collector on concrete and construction jobs.

The Ermator S50 is a compact, single-motor wet/dry vacuum that is specifically designed to work with a power tool (up to 1,800 watts). The tank holds up to 14 gallons and can accept a bag for safer, dust-free emptying of the vacuum.

The 86-WD is a compact, all-steel wet/dry vacuum designed for efficient cleanup tasks in small spaces, such as on scaffolding. It features a "Never Clog" Dacron filter bag plus certified HEPA filter to promote better indoor air quality and worker safety.

The 86D is designed for efficient cleanup in tight spaces, such as on scaffolding. It features a high-efficiency drop-in style HEPA filter that is individually certified to a minimum efficiency of 99.97% at 0.3 microns. Comes with cleaning accessories.

The model 102 vacuum is ideal for use by those who perform abatement work, such as lead, asbestos, concrete dust/silica, etc. It features a drop-in style HEPA vacuum that is certified with a minimum efficiency of 99.97% at 0.3 microns* to meet EPA RRP requirements.

The model 45HEPA-TT vacuum was designed specifically to be used with power tools, helping to promote better indoor air quality and worker safety. It features a convenient "Tool Trigger" that allows the operator to turn the vacuum on or off through the power tool. 

With its powerful 8.0 HP motor, the T4000 produces 280 CFM and 125” of water lift. The T4000 is a powerful dust extractor capable of recovering fine dust created during building, grinding, plastering, and construction activities.

The T7500 provides 353 CFM and 110" of water lift, and exceeds the requirements of all large 230V three-phase grinders. It features two HEPA filters, Jet Pulse® filter cleaning technology, and Longopac drop-down dust-free disposal.

The T7500 provides 353 CFM and 110" of water lift, and exceeds the requirements of all large 230V three-phase grinders. It features two HEPA filters, Jet Pulse® filter cleaning technology, and Longopac drop-down dust-free disposal. Includes an integrally mounted power receptacle.

Job sites with no or limited electrical power aren’t a problem for this propane-powered dust collector. It features an 18 HP Honda motor that provides 410 CFM and 115” of water lift, giving you enough power to keep up with big 3-head grinders on tough jobs.

The T8600 provides 353 CFM and 110" of water lift. This 480V, 3-phase dust collector exceeds the requirements of the most demanding thread-head grinders. It also features Jet Pulse® filter cleaning technology and Longopac dust disposal.

Packed with power and plenty of filter area, the T10000 easily keeps up with the most demanding three-head grinders on the market today. It provides 480 CFM, 120" of water lift, and convenient drop-down Longopac dust disposal. For best results, pair with the Ermator C5500 Pre-Separator.

Talk about powerful! This 230V HEPA dust extractor can handle a single four-head grinder or two 3-head grinders! It features a powerful 16 HP motor that produces 647 CFM and 140" of water lift.

This 480V HEPA dust extractor can handle a single four-head grinder or two 3-head grinders! It features a powerful 18 HP motor that produces 710 CFM and 140" of water lift.

The C3000 captures 90% of the material before it reaches your dust collector, keeping dust extractor filters clean and extending the grinding operation with fewer interruptions.

The Ruwac Little Red Vacuum is a compact vacuum designed for picking up both concrete chips and fine powders on concrete surface prep jobs. Its oversized MicroClean filter is 99.9% efficient at 0.5 microns, and it is HEPA-ready for absolute filtration.