The Only Extractor that Can Keep Up with a Larger Shaver!
Talk about powerful! This 230V HEPA dust extractor produces enough airflow to handle a single four-head grinder or two three-head grinders! It features a powerful 16 HP motor that produces 647 CFM and 140" of water lift.
The T15000 features a greatly expanded pre-filter surface area that acts as a built-in pre-separator, providing superior cyclonic separation. This advanced filtration technology enables longer run times with fewer interruptions. (For best results when using the T15000 with two 3-head grinders (up to 32” wide), we recommend using a pre-separator between each grinder and the T15000).
The T15000 features four individually tested and certified HEPA filters, each with a minimum efficiency of 99.99% at 0.3 microns. A primary sock-style pre-filter provides long, uninterrupted service.
The intake port connects to a Y-connector where one or two 3" hoses can be connected. When used with one hose, up to 100-feet in length can be used. The out-port allows venting of the exhaust air away from the work area or outside of the building via a hose connection.
Like all Ermator vacuums, T15000 is equipped with drop down disposal, Longopac collection system and efficient JetPulse cleaning technology. Disposal of collected dust is easy, mess free, and safe.
The T15000 comes with a 3-inch, 33-foot-long hose and a single 4” to double 3” Y connector.
Complete Package Includes:
- 3-inch, 33-foot grinder hose
- 2-inch, 25-foot hose
- 2-piece wand
- Floor too
- CFM: 647
- Water lift: 140"
- HP: 16
- Amps: 42
- Weight: 905 lbs
- Volts: 230
- Filters: 4 HEPA filters, 81 sq ft, 99.99% at 0.3 microns