Replacement Pumps, Parts and Rebuild Kits

115V 1.3GPM 60 PSI bypass pump with Viton valves. Pump is equipped with 3/8” NPT Female Ports. 3 Champer diaphragm pump, self priming and capable of running dry.

This replacement 120 PSI pump draws 115VAC and delivers a flow rate of 1.4 GPM. This self-priming pump can withstand a maximum temperature of 170°F and is capable of running dry.

Flojet on-demand pump used for transfer system will mount on a blue pressure tank. Model 4325-143.

This 125V pump is commonly used with the Phoenix R175, R200 and Jon-Don R340 dehumidifiers. It is equipped with a 3/8" check valve barb for the outlet and pumps approximately 30 PSI.

This pre-wired condensate pump by Therma-Stor LLC is designed for use with a selection of the Phoenix line dehumidifiers, including the 200 MAX, 200 HT, 270HTx, as well as the Jon-Don Ultimate 340.

115V condensate pump for the Dri-Eaz 7000XLi and Revolution LGR.

This 115V condensate pump is designed for use on the Dri-Eaz 1200, Evolution LGR, and LGR 2400 dehumidifiers.

Shurflo 12VDC 60 PSI Pump

ShurFlo 12V DC demand pump for use with old style transfer pump with gray pressure tank. Commonly found on older Prochem machines such as the CubXL, Bruin II, and original Performer.

115V 1.3GPM 170 PSI ShurFlo pump with Viton check valves. Pump is equipped with 125 PSI demand switch which allows it to be used with low flow rate tools such as upholstery and stair tools. This pump can be used in nearly any application where a 100 PSI pump is currently used.

ShurFlo Pump 45 PSI

SHURflo transfer pump. 12V right to left flow used on the older style water transfer systems on Prochem truck mounts. Typically used a square D pressure switch and was mounted next to or on top of a gray tank in a gray metal box. Pump comes with wing nut barbs for hose.

This 3CP1120.3 Cat Pump is a 4.2 GPM pump rated at 100-2200 PSI. This pump has a 16.5MM dual drive shaft pump with cover. Fits Maxx 450 and 470 and older CDS units.

Cat Pump brand 5CP plunger pump, pumps 4.5GPM with a max pressure of 3,500PSI. Clutch and belt driven with 3/8" FPT ports.

Replacement Clutch for 3CP series Cat Pump.

Hypro Pump model 5300 series. Fits several units.

Valve Kit for Cat Model 340.

Cat 3CP1140CS.3 Pump

3CP1120RS.3 Cat Pump

This condensate pump kit is designed for use with Santa Fe Classic and Santa Fe HC Dehumidifiers. It is ideal for applications where using the gravity drain system alone isn’t possible. This durable, reliable pump kit provides up to 15 feet of vertical lift for exceptional performance.

CAT Pump conversion, Daishin to 5CP.

Cat Pumps 5CP2150WCS.3

5CP single groove clutch.

Pump conversion kit Hypro 2258 to Cat 3CP.