The Only Extractor that Can Keep Up with a Larger Shaver!
Talk about powerful! This 480V HEPA dust extractor produces enough airflow to handle a single four-head grinder or two three-head grinders! It features a powerful 18 HP motor that produces 710 CFM and 140" of water lift.
The T18000 features a greatly expanded pre-filter surface area that acts as a built-in pre-separator, providing superior cyclonic separation. This advanced filtration technology enables longer run times with fewer interruptions. (For best results when using the T18000 with two 3-head grinders (up to 32” wide), we recommend using a pre-separator between each grinder and the T18000).
The T18000 features four individually tested and certified HEPA filters, each with a minimum efficiency of 99.99% at 0.3 microns. A primary sock-style pre-filter provides long, uninterrupted service.
The intake port connects to a Y-connector where one or two 3" hoses can be connected. When used with one hose, up to 100-feet in length can be used. The out-port allows venting of the exhaust air away from the work area or outside of the building via a hose connection.
Like all Ermator vacuums, T18000 is equipped with drop down disposal, Longopac collection system and efficient JetPulse cleaning technology. Disposal of collected dust is easy, mess free, and safe.
The T18000 comes with a 3-inch, 33-foot-long hose and a single 4” to double 3” Y connector.
|Vacuum Hose Fit Size||3"|
|Category||Concrete Dust Collector Vacuums, Dust Containment, HEPA Vacuums|
|Warranty Information||All Ermator devices and accessories have a 12-month factory warranty for material and manufacturing defects. When returning the attached warranty slip, the warranty extends to 36 months. Do not attempt to repair the suction apparatus without the consent of the manufacturer. The warranty does not cover defects which are the result of normal wear and tear, negligence, defective use, unauthorized repair or the suction apparatus being connected to the incorrect voltage. In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or our authorized representative for warranty examination and for any warranty repair or replacement.|