Injectidry

List
sort-descending
Injectidry Vac‑It Panel Carry Bag
Injectidry SKU# OE-ICB-EA
If you're tired of having Vac-Panels laying all over the place, then this heavy duty nylon carry bag is for you. Capable of carrying 10 Vac-It Panels.
$90.00
Ships Direct From Manufacturer.
Injectidry Silencer
Injectidry SKU# OE-IDS60SIL-EA
The Silencer is made of ABS plastic and quiets the drying system by about 25%. It reduces some of the impeller noise in addition to the air rush sound. Attaches to the 2-inch OUT trunkline and sets up in seconds.
$147.75
Ships Direct From Manufacturer.
Injectidry Replacement Hose Cuff, 1 1/2"
Injectidry SKU# MP-HC3-EA
Replacement 1.5" hose cuff used on Injectidry HP-60 and HP-60 Plus Units.
$4.53
In stock
Injectidry Direct‑It “IN” Universal Air Mover Adapter
Injectidry SKU# OE-IDI17-EA
The Direct-It “IN” Universal Air Mover Adapter gives you the ability to dry critically damaged areas fast! This handy accessory attaches to most standard centrifugal air movers, and allows you to direct air in as many as 17 different locations and dry up to 22 feet!
$738.00
In stock
Injectidry Wall Injectors, Replacement (100 PK)
Injectidry SKU# OE-IM06A-EA
Package of 100 replacement wall injectors used on Injectidry HP60 and HP60-Plus Units.
$117.47
Ships Direct From Manufacturer.
Injectidry QCC01 High Pressure Quick Connect
Injectidry SKU# MP-IDQCC01-EA
This high-pressure quick connector is used to connect sections of either the Injectidry Active Hoseline or the Injectidry 1.5" Safety Yellow Blank Hose on Injectidry Wall Systems and the Injectidry Floor Systems.
$5.81
In stock
Injectidry HP‑PLUS Floor Drying Package
Injectidry SKU# OE-HPPLSFDP-EA
The HP-PLUS Floor Drying Package is the improved version of Injectidry's HP60i Floor Drying package. This unit is quieter (less than 60 dB), more powerful, and easier to set up than the original. You can use up to 12 Multi-Port or 20 8-Port Vac-It panels with an increase up to 30% in drying capabilities. 
$5,492.00
In stock
Injectidry AIR IN Main Hose
Injectidry SKU# MP-AIMH-EA
This 6-foot hose fits the Injectidry AIR IN port. It features an inline filter and factory-set quick connects. The inline filter should be inspected before each job and cleaned if needed.
$449.77
Out of stock accepting backorders.
Injectidry Active Hoseline
Injectidry SKU# MP-IDAH3-EA
This 6-foot active hoseline from Injectidry features ten 3/8"air ports and comes with ten lines of 3/8" tubing each 20" in length. The hoseline also comes with two hose cuffs and one quick connect hose connector.
$109.01
Ships Direct From Manufacturer.
Injectidry Wall Injector, Blue, 3/16 Inch (100 PK)
Injectidry SKU# MP-IM06PU-EA
These blue wall injectors have a 3/16" diameter with molded wings to hold them in place while the machine is in use. The blue injectors allow users to concentrate more air into wetter areas.
SKU UnavailableNo Longer in Stock
Injectidry Main AIR IN Quick Connect
Injectidry SKU# MP-PTFC-EA
This Injectidry Quick Connect fits the Main Air IN side for the Injectidry HP60 model machine.
$89.74
In stock
Injectidry Main AIR OUT Quick Connect
Injectidry SKU# MP-PTMA-EA
This Injectidry Quick Connect fits the Main AIR OUT side.
$102.49
Out of stock accepting backorders.
Injectidry Quick Connect Manifold
Injectidry SKU# MP-QCM01-EA
This Injectidry quick connect inline manifold features ten ports 3/8" in diameter.
SKU UnavailableNo Longer in Stock
Injectidry AIR OUT Main Hose
Injectidry SKU# OE-AOMH-EA
This AIR OUT main house is designed for use with Injectidry systems. It measures 6 feet in length with factory-set quick connects. It also comes with is a 2" hose cuff and 2" male pipe thread fitting.
SKU UnavailableNo Longer in Stock
Injectidry Safety Yellow Tubing, 3/8 Inch x 200 Feet
Injectidry SKU# OE-RH05A-EA
This 200-foot roll of 3/8" tubing is shipped un-cut. The recommended general-purpose tubing length is 18"–20". Use 6" if you wish to hang Injectidry Active Hoselines from the ceiling or upper walls.
$245.05
Ships Direct From Manufacturer.
Injectidry Panel T Connector
Injectidry SKU# OE-VACT-EA
This Injectidry panel T connector has attached hose cuffs. It is designed for use with Injectidry systems.
$42.00
Ships Direct From Manufacturer.
Injectidry Tubing Connectors, 3/8" x 3/8" (100 PK)
Injectidry SKU# MP-RH07A-EA
These tubing connectors are designed for use with Injectidry systems. They have a 3/8" diameter.
SKU UnavailableNo Longer in Stock
Injectidry HP‑PLUS Wall and Ceiling Package
Injectidry SKU# OE-HPPWCP-EA
The HP-PLUS Wall and Ceiling Drying Package is the improved version of Injectidry's HP60i wall and ceiling package. This unit is quieter (less than 60 dB), more powerful, and easier to set up than the original.
$5,379.00
In stock
Injectidry HP60 Floor Drying Package
Injectidry SKU# OE-HP60FDP-EA
The Injectidry HP60 Floor Drying Package is designed specifically for floor drying. This setup is extremely quick, easy, and efficient for your typical floor drying needs.
$5,495.71
Ships Direct From Manufacturer.
Wire‑Reinforced Mylar Flex Ducting, 10 Inch x 25 Feet
Injectidry SKU# MP-FLEX10...
When you need low cost, non-collapsible ducting for your air scrubber or dehumidifier, this is the choice for you. Use this 25' long wire-reinforced Mylar flex ducting for all intake and exhaust tasks.
SKU UnavailableNo Longer in Stock
Injectidry HP60i Wall and Ceiling Package
Injectidry SKU# OE-IDS60-EA
Injectidry's high-pressure drying systems are specifically developed to target high risk areas of hidden moisture. The HP60i can be used with Vac-It Panels to quickly dry hardwood floors. Capable of drying over 100 linear feet of wall or ceilings.
SKU UnavailableNo Longer in Stock
Protect‑It Pan Dehumidifier Drip Tray
Injectidry SKU# OE-PIT...
Leaky dehumidifiers lead to big messes. Protect yourself from secondary damage with this heavy-duty polyethylene pan. It holds up to 7 gallons of water, providing plenty of emergency overflow protection, and fits the most common units used.

Starting at $60.59

In stock
Direct-It's Axial Adapter
Injectidry SKU# OE-IDIA-EA
The Direct-It Axial Adapter connects to both axial fans and air scrubbers, allowing contractors to direct drying and scrubbing efforts into wall cavities and other areas in need of high air exchange rates. This easy-to-setup system gives you the ability to replace fewer walls, ceilings, and hardwoods.
SKU UnavailableNo Longer in Stock
Adaptidry 9‑Port Adapter Kit
Injectidry SKU# OE-IDIAMF-EA
The Adaptidry achieves high efficiency by dispersing intense drying power simultaneously to multiple areas around the room.
SKU UnavailableNo Longer in Stock

Real-World Knowledge Resource Center

  • Sign up for classes and training opportunities online or at a branch near you
  • Check out free how-to articles and technical tips prepared by our experts
  • Read our blog for the latest industry updates
See upcoming Webinars
Gain Real-World Knowledge