The Injectidry HP60FDP Floor Drying Package is designed specifically for floor drying. This setup is extremely quick, easy, and efficient for your typical floor drying needs. With the many different Vac-It Panels that are available, you can quickly dry almost any wood floor.
The Injectidry HP60 drying system is the only truly industrial-gradesystem sold today. The internal blower is a Regenerative Blower and many operate 20,000 hours or more trouble free. This translates into more than 2 years of continuous operation. It is not a fan that is typically associated with a portable carpet cleaning machine or shop-vac.
You can increase the versatility of this unit by purchasing the Active Hoseline Upgrade Kit (Contact the Jon-Don Restoration Department at 800-556-6366 to place an order). The upgrade kit enables you to dry walls, ceilings, and under cabinets.
Features and Benefits:
Use with either positive or negative air flow
Over 100 CFM
60 inches of water lift
8 decibels quieter than competing models, and when using the silencer it is even more quiet
Compare this performance with its competitors.
Airflow in CFM
Inches of Water Lift
Using 60 injectors
Using 30 injectors
Using 22 injectors
Using 16 injectors
The Injectidry HP60i Floor Drying Package includes the following:
1 - HP60 Unit (OE-IDS60B-EA)
1 - Power Cord (MP-MC143-EA)
1 - Main Air IN hose with 2" cuff
1 - Main Air OUT hose
1 - Silencer (OE-IDS60SIL-EA)
1 - Water separator (OE-IDS60WS-EA)
1 - 3/8" x 200' Safety Yellow Tubing (OE-RH05A-EA)
1 - 10" x 30" Clear Panel (OE-SPLPCLR-EA)
5 - Slim Panels - small ports (OE-IVISLIM9-EA)
3 - Multi-Port Panels (OE-IVIPSP5-EA)
6 - 7" x 30" extra-slim, small point vac-it panels (OE-XSP10-EA)
1 - Large 8-Point Panel (OE-IVIPP-EA)
50 - ID soft (red) nipple caps (OE-RP2-EA)
4 - Quick Connect Panel T's (OE-VACT-EA)
1 - Carry Bag (OE-ICB-EA)
10 - Endcap Plugs (OE-IDQCEP01-CS)
1 - 1.5" x 50' Safety Yellow Blank Hose (MP-IDPL03-EA)
1 - Rolling Duffle Bag (OE-DB-EA)
30 - Quick Connect 1.5" Hosecuffs (MP-HC3-EA)
9 - Quick Connect Inline Manifolds (MP-QCM01-EA)
2 - Small Y' (MP-QCY-EA)
4 - 1.25" Hose connectors (MP-IDQCC01-EA)
1 - Truck mount extraction connector
1 - Main W (to be used with HB300)
IMPORTANT: Due to probable high heat output, the silencer should be elevated from surfaces that could be damaged by heat.