The Pullman-Holt 102ASB is specifically designed to handle the roughest abatement, remediation, and restoration work you can throw at it.
This vacuum is built tough. It features a heavy-duty polyethylene tank that resists dents, chips, and cracks. You don’t have to worry about this unit falling apart on the job or getting jostled around in your van or truck. It’s built to withstand heavy use and abuse.
The 102ASB features a commercial grade vacuum motor that delivers 2.0 HP and draws 11.1 amps. You get 105” of water lift and 110 CFM, which is more than enough power for fast pickup of dry materials on time-sensitive jobs both big and small.
The high-efficiency “drop-in” style HEPA filter is individually tested and certified to have a minimum efficiency of 99.97% at 0.3 microns (based on 1EST-RP-CC001 particle count test method). The filter is made from a single piece of high-grade HEPA media to eliminate the possibility of leaks or compromised performance.
The 102ASB also features a spacer sleeve that keeps the Dacron bag away from the HEPA filter body, enabling full use of the “never clog” Dacron bag. The Dacron material sheds dust to maintain maximum vacuum efficiency.
A 1-inch polyester pre-filter is attached to the inlet (bottom) surface of each HEPA filter, providing final protection to the HEPA filter from premature failure due to clogging. You get full 3-stage filtration for maximum air quality.
To top it off, the air seal gasket provides a tight air seal between the motorhead and tanks, forming a positive lock fit to prevent leakage.
The 102ASB offers superior vacuum recovery, ranging from dry, light particulates, to heavy debris; hazardous materials such as asbestos, lead, concrete/silica dust, etc.
|Cord Length||25 ft.|
|Vacuum Hose Fit Size||1.5 inch|
|Category||Dust Containment, HEPA Vacuums|