HydraMaster CDS 4.7 Direct Drive Truck Mount Replacement Parts
-
HydraMaster Solenoid Bypass Repair Kit (000‑078‑102)ea Repair Kit Old Style Bypass Repair -
Valve, 80PSI Check80 PSI Check Valve.
- HydraMaster
- 80PSI Check Valve
- Free Technical Support
$184.87 -
Solenoid, Vacuum ControlMAC vacuum control solenoid.
- HydraMaster
- MAC Valve
- Vacuum Operated Solenoid
$105.07 -
Valve, 1‑1/2" Brass Ball1-1/2" Brass ball valve. Typically used as a waste tank dump valve.
- Sturdy Brass Casting
- Stainless Steel Inner Ball
- PTFE SealsÂ
- Rated up to 600PSI
$111.72 -
Assembly, HM Protected Recovery FloatProtected recovery tank float assembly.
- HydraMaster
- Recovery Tank Float Assembly
- Pre Universal Tank Design
$101.08 -
Stainless Steel Chemical Pump (100906)
Stainless steel chemical pump by General Pumps.
- Stainless SteelÂ
- Easily RebuildableÂ
- Used On A Wide Variety Of Truck Mount Systems
$200.31 -
Truck Mount Pump Out System
Featuring a 12VDC motor this diaphragm waste pumpout produces consistent, smooth pulsation to prevent misdirected wastewater flooding. This pump can be run dry for short periods without causing damage to the pump.
- 0.5HP drive motor
- Diaphragm pump by COMET USA
- For use with any truck mount system
$2,263.57 -
HydraMaster Adjustable Chemical Flow Meter, 1/8"FChemical Flow Meter
- HydraMaster
- Adjustable Flow Meter
- 2-10GPM
$144.97 -
Hose, Winterizing and DescalingTruck mount winterizing and descaling hose kit.
- Winterizing and Descaling Hose
- Provided by Jon-Don
- Free Technical Support
$122.73 -
Valve, Chemical Metering
This 1/8" female pipe thread chemical metering valve will fit most Prochem, BLUEline, Sapphire Scientific and HydraMaster units.
- SwageLok Valve
- Needle Valve
- 1/8"
-
Bypass Valve
Brass pressure regulator valve.
- Valve
$122.09 -
Cat Pumps 3CP Pump (3CP1120.3)
This 3CP1120.3 Cat Pump is a 4.2 GPM pump rated at 100-2200 PSI. This pump has a 16.5MM dual drive shaft pump with cover. Fits Maxx 450 and 470 and older CDS units.
- 2200 PSI 4.2GPM
$844.30 -
Filter, SS, Waste Tank
Stainless Steel Waste Tank Filter designed for use with HydraMaster Maxx 450 and Maxx 470 truck mount units.
- HydraMaster Recovery tank filter
-
ISO 150 Synthetic Oil
This synthetic blower oil is an ISO 150 oil that is designed for use in the Tuthill blowers. ISO 150 is designed to operate in ambient temperatures up to 120°F.
- Synthetic blower oil
- For use with Tuthill blowers
- Operates in high ambient temperatures
-
Bearing CDS Clutch MNT
Bearing CDS Clutch MNT
-
Cat Pumps Thermo Valve, 165 Degree, 3/8"M (7129)ea Thermo Vlv 3/8 165Deg Composite
-
Gauge, HM Vacuum2-1/2" panel mount gauge 0-30"HG
- HydraMaster
- 0-30"HG
- Black Face
-
Valve, 180 Thermal Relief
General Pump 180° thermal relief valve.
- General Pump
- Thermal Relief
- 180° Open
-
TKX Lubricant, 16oz (4KK77)Aerosol blower lubricant. For use with all truckmount and blower types.
- Blower Lubricant
- Non Drying Oily Film
- Displaces Moisture
- Protects Against Corrosion
- For use with All Vacuum Blower and Truckmount TypesÂ
-
Bushing, Modified OrificeModified orifice bushing.
- Modified Brass Bushing
- 1/4"FPT x 3/8"MPT x 3/8"FPT
- HydraMaster Bypass Orifice FittingÂ
-
Brass Adapter, FGH x 3/8"M (194‑C)3/8"MPT x FGH brass adapter.
- Brass
- 3/8"M x FGH
- Adapter
- 89GH126
-
O‑Ring Check Valve Assembly
This O-ring goes on the check valve cap and seals the cap to the check valve. Measures 7/8" ID x 1 1/16" OD.
- O-Ring fits cap on older Prochem brass chemical pumps
Â
-
Chemical Pump Check Valve (42‑809265)
This check valve fits most Prochem stainless steel chemical pumps.
- Check Valve
- For Use with Many Prochem and HydraMaster Chemical Pumps
- Ships Same Day
-
Ball‑Valve, 3 Way Chemical Selector
Chemical selector valve has 3-way setting: off, prime, and chemical. Fits most Prochem, BLUEline, HydraMaster and Sapphire Scientific truck mount units.
- Ball-Valve
- 3 Way
- Chemical selector
