Concrete Maintenance Pads

If you're using an ultra high-speed floor machine that operates between 1500-3000 rpm, the Ameripolish® G3 is the floor burnishing pad you need. Made from polyester fibers in a nonwoven construction, this pad is designed for the burnishing phase after Ameripolish® 3D SP E is applied and dried.

Ideal for use on terrazzo, resin (top coat), epoxy, concrete, and more, these pads will remove scratches and surface imperfections, and restore most surfaces to a “good as new” shine. Impregnated with FERRZON, the only substance capable of scratching a diamond. Use wet or dry.

Ideal for use on terrazzo, resin (top coat), epoxy, concrete, and more, these pads will remove scratches and surface imperfections, and restore most surfaces to a “good as new” shine. Impregnated with FERRZON, the only substance capable of scratching a diamond. Use wet or dry.

Ideal for use on terrazzo, marble, granite, ceramic tiles, resin (top coat), epoxy, concrete, and acrylic floors. will remove scratches and surface imperfections, and restore most surfaces to a “good as new” shine. Impregnated with FERRZON, the only substance capable of scratching a diamond. Use wet or dry.

Ideal for use on terrazzo, resin (top coat), epoxy, concrete, and more, these pads will remove scratches and surface imperfections, and restore most surfaces to a “good as new” shine. Impregnated with FERRZON, the only substance capable of scratching a diamond. Use wet or dry.

Ideal for use on terrazzo, resin (top coat), epoxy, concrete, and more, these pads will remove scratches and surface imperfections, and restore most surfaces to a “good as new” shine. Impregnated with FERRZON, the only substance capable of scratching a diamond. Use wet or dry.

These unique floor pads from Unitex leave a high shine on stone, terrazzo, and polished concrete floors without the use of waxes, sealers, strippers, or other chemicals!

These unique floor pads from Unitex leave a high shine on stone, terrazzo, and polished concrete floors without the use of waxes, sealers, strippers, or other chemicals!

Crete Rx Honing Tool is designed for use with LiquiGrind to grind out imperfections in previously polished concrete. It prepares concrete for the polishing step by removing imperfections and smoothing the surface.

This polishing tool is designed for use with propane equipment and auto scrubbers. It pushes resin to fill concrete pores and build a gloss barrier. It establishes a beautiful polished look on the floor after the honing step in the Betco Crete Rx System.

The Betco Crete Rx Reset Tool is an abrasive tool that quickly smooths out rough, worn areas of polished concrete. It removes layers of finish or accumulated film, preparing the surface for subsequent honing steps.

Sealant Infused (SI) Cleaning Pads are designed to continually fill porous concrete with sealant while they clean. As the pad spins and removes all types of dirt, grease, and soiling, sealant is pushed into the concrete pores (not a topical film!). The result is enhanced protection coupled with a deep gloss.

VorteX Flexible Heavy-Duty Diamond Impregnated pads are absolutely unique in the marketplace. These pads let you go from heavy grinding to a final polishing on concrete floors using a high-speed burnisher and just a mist of water!

The SmartFloor Pad System from Ameripolish works with standard auto scrubbers and swing machines to enable you to maintain a high standard of appearance on polished concrete floors. This easy-to-use system removes daily dirt and grime, etching, and even stains.

The Ameripolish SmartFloor Pad Driver is designed for use with SmartFloor DOI inserts and Stain Remediation inserts. Each pad has a coverage rate of 100,000 square feet.

Ameripolish® SmartFloor™ DOI Inserts for daily maintenance are made of unique diamond agglomerate technology that maintain a highly refined floor without on-going stock removal. These inserts help maintain and improve the aesthetics, especially Distincess Of Image (DOI) or clarity of a concrete floor.