Send to a Friend

Revive‑Maxx Stone and Concrete Polishing Pads with FERRZON® Stronger than Diamonds, 27"

Revive‑Maxx Polishing Pad, Orange,100 Grit, 27" (2 PK)
SKU#: FP-RM27100-CS
This item ships directly from the manufacturer.
All sales final - returns not accepted. Read more
$218.48
Revive‑Maxx Polishing Pad, Orange, 200 Grit, 27"
SKU#: FP-RM27200-EA
In stock
$119.15
Revive‑Maxx Polishing Pad, Red, 400 Grit, 27"
SKU#: FP-RM27400-EA
$117.48
Revive‑Maxx Polishing Pad, Blue, 800 Grit, 27"
SKU#: FP-RM27800-EA
$95.78
Revive‑Maxx Polishing Pad, Yellow, 1500 Grit, 27"
SKU#: FP-RM271500-EA
$95.78
Revive‑Maxx Polishing Pad, Green, 3000 Grit, 27"
SKU#: FP-RM273000-EA
$95.78

Product Highlights

Ideal for use on terrazzo, marble, granite, ceramic tiles, resin (top coat), epoxy, concrete, and acrylic floors. will remove scratches and surface imperfections, and restore most surfaces to a “good as new” shine. Impregnated with FERRZON, the only substance capable of scratching a diamond. Use wet or dry.
  • Impregnated with FERRZON®—Stronger than Diamonds!
  • High abrasion and heat resistance
  • Can be used wet or dry
  • Reduces cleaning cost and time
Same-day Shipping
Industry's Best Guarantee
Equipment Service & Repair
Free Technical Support

Product Description

ReviveMax pads contain FERRZON, which is the only substance that can scratch a diamond.  Because of its unique structural properties FERRZON has been shown to be superior to diamonds on floor maintenance, grinding and polishing.

These pare are open weave and stiffer than competing pads which offers greater self cleaning and a much better pad life and durability.

These pads offer exceptional performance and can be used wet or dry.  If used wet they require only water and remove the need for expensive chemicals.

With the availbility on numerouse grits, these pads can be used on most any to surface to include:  Terrazzo, Marble, Granite, Ceramic tiles, Resin (top coat), Epoxy, Concrete and Acrylic floors.

ReviveMax pads can be used wet or dry under scrubbers, UHS burnishers and 3 head machines.

Features:

  • Long life
  • 20 mm thick pads
  • Only 5 passes per grit
  • Density of 40-50 kg/m3
  • Constructed of 60 Denier virgin polyester
  • Open weave construction

The ReviveMax Pads are color coded for the different grits to make your job even easier, and are available in the following grits:

 

  • Black (200 Grit) - The most aggressive. The black pad is for deep surface renovation and designed for occasional use on a very bad floor.
  • Red (400 Grit) - This coarse pad is for heavy duty surface renovation
  • Blue (800 Grit) - A Medium pad designed for deep cleaning that will produce an economical light reflective finish.  Most popular in large industrial and commercial applications
  • Yellow (1500 Grit) - Used for polishing and cleaning, produces a clear reflective shine
  • Green (3000 Grit) - The green pad serves two functions.  Firstly used wet or dry it will finish off the four step process leaving a polish to your surface with the highest shine available.  Secondly, if used daily it will maintain and improve the polish.  In high traffic areas it will remove small scratches and slight dullness, leaving you with a high shine floor.

Usage

For best results always use a flat Velcro-style drive plate. A brush type drive plate can result in uneven pad wear.

 

Working Wet

When working wet, a floor polishing machine set at 180-400 RPM with a minimum weight of 80 pounds is recommended.

 

Red Pad 

Mainly used for removing light to medium scratches, etch marks and cleaning deeply soiled floors. It can be used to remove standard floor coatings. When using an auto scrubber, turn the water to medium flow, set maximum down pressure on the heads, and work in a systematic way.

 

Only cover an area you can easily control and vacuum residue as you go. To remove scratches, run the machine fitted with the pad over the surface 4-6 times in succession, then check if the damaged areas are removed before continuing.

 

Blue Pad

This is a deep cleaning pad. It can be used to deep clean and remove light scratches or repair lightly worn surfaces. Follow the same procedures as the red pad. Look for an even hone and scratch-free finish when this stage is completed

 

Yellow Pad

This pad will start the polishing process. Follow the same procedure as on previous pads. Look for a silky luster when this stage is completed.

 

Green Pad

The final polishing pad. As part of a light restoration, make 5 passes over the floor. When used every day wet or dry, the green pad will clean and maintain the floor and offer the highest possible shine.

 

Working Dry

These pads are designed to withstand high speeds without generating high heat. Using a high-speed burnisher, it is possible to remove scratches and etch marks in many stone and terrazzo floors.

 

Removal of scratches and etch marks:

 

Red Pad

  • Run burnishing machine at medium speed
  • Move over the surfaces to be repaired at a slow walking pace
  • Work surface in a side to side direction to the chosen stop points
  • Continue working for 3-4 passes

 

Blue Pad

  • Run machine at high speed
  • Move over the surfaces at a slow walking pace
  • Work surface in a side to side direction
  • Continue working for 2-3 passes

 

Yellow Pad

  • Run machine at high speed
  • Move over the surfaces at a normal walking pace
  • Work surface in a side to side direction
  • Continue working for 2-3 passes

 

Green Pad

  • Run machine at maximum speed
  • Move over the surfaces at a normal walking pace
  • Work surface in a random method

Technical Specifications

Diameter (in.) 28
Brand Provided by Jon-Don
Category Floor Pads, Polishing Pads, Stone Care
Condition new

Documents

Real-World Knowledge Resource Center

  • Sign up for classes and training opportunities online or at a branch near you
  • Check out free how-to articles and technical tips prepared by our experts
  • Read our blog for the latest industry updates
See upcoming Webinars
Gain Real-World Knowledge