Please select a Shopping List
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Prochem Everest (Carbureted Nissan) Truck Mount Replacement Parts

View as List Grid

Items 1-24 of 60

Page
per page
  1. Prochem Access Panel Waste Tank Gasket
    Prochem Access Panel Waste Tank Gasket

    This access panel gasket fits older Prochem 80-gallon and 100-gallon waste tanks. It is designed to be used with Prochem waste tank access panel part #50-502085.

  2. Prochem Everest Bypass Orifice Plate (8.618‑919.0)
    Prochem Everest Bypass Orifice Plate (8.618‑919.0)
    Everest Bypass Orifice Plate
    • Prochem
    • Bypass Orifice Plate
    • For Use with Everest
  3. 2" Vacuum Cap (19‑013)
    2" Vacuum Cap (19‑013)
    2" vacuum cap.
    • 2" Cap
    • Found on ProChem Sapphire and Vortex Units
  4. Valve, 180 Thermal Relief
    Valve, 180 Thermal Relief

    General Pump 180° thermal relief valve.

    • General Pump
    • Thermal Relief
    • 180° Open
  5. TKX Lubricant, 16oz (4KK77)
    TKX Lubricant, 16oz (4KK77)
    Aerosol blower lubricant. For use with all truckmount and blower types.
    • Blower Lubricant
    • Non Drying Oily Film
    • Displaces Moisture
    • Protects Against Corrosion
    • For use with All Vacuum Blower and Truckmount Types 
  6. Carquest Air Filter Nissan A15 (87906)
    Carquest Air Filter Nissan A15 (87906)

    Non branded, replacement air filter for Nissan A-12 and A-15 engines. 

    • Replacement Non Branded Filter
    • Top Quality 
    • Used for Nissan Engines
  7. Stainless Steel Chemical Pump (100906)
    Stainless Steel Chemical Pump (100906)

    Stainless steel chemical pump by General Pumps.

    • Stainless Steel 
    • Easily Rebuildable 
    • Used On A Wide Variety Of Truck Mount Systems
  8. Truck Mount Pump Out System
    Truck Mount Pump Out System

    Featuring a 12VDC motor this diaphragm waste pumpout produces consistent, smooth pulsation to prevent misdirected wastewater flooding. This pump can be run dry for short periods without causing damage to the pump.

    • 0.5HP drive motor
    • Diaphragm pump by COMET USA
    • For use with any truck mount system
  9. Hose, Winterizing and Descaling
    Hose, Winterizing and Descaling
    Truck mount winterizing and descaling hose kit.
    • Winterizing and Descaling Hose
    • Provided by Jon-Don
    • Free Technical Support
  10. Brass Adapter, FGH x 3/8"M (194‑C)
    Brass Adapter, FGH x 3/8"M (194‑C)
    3/8"MPT x FGH brass adapter.
    • Brass
    • 3/8"M x FGH
    • Adapter
    • 89GH126
  11. Float Switch, Recovery Tank
    Float Switch, Recovery Tank

    This recovery tank level kill switch can also be used as the pump-out activation switch. This switch fits most BLUEline and some HydraMaster units.

    • 1 1/2" pipe thread
    • Prochem
    • HydraMaster
    • BlueLine Equipment
    • Sapphire Scientific 
  12. Belt, BX46
    Belt, BX46

    Belt BX46

    • BX46 Belt
  13. Pulley, 2TB58 (5 7/8 Inch)
    Pulley, 2TB58 (5 7/8 Inch)

    Pulley 2TB58 (5 7/8")

    • 2 belt V pulley for Performer blower
  14. Belt, AX41
    Belt, AX41

    Blower belt, 2 required, Legend version D and Prochem PTO water pump.

    • AX41 Belt
  15. Belt, AX29
    Belt, AX29

    Governor belt for Everest and Performers and water pump for Legend series.

    • AX29 Belt 
    • Fits Governor on Performer after 12/99, Bear and Bear Cat Machine
    • Water pump on some Legend units
    • Magneto on oil fired truck mounts
  16. Belt, 11720‑77702 for Bearcat/Performer
    Belt, 11720‑77702 for Bearcat/Performer

    Engine fan belt 11720-77702 for Bearcat/Performer units.

    • 11720-77702 alternator belt
    • For Everest, EFI, PP/HP, Performer after 12/99, Bear and Bear Cat machine
    • Water pump on some Legend units
    • Magneto on oil fired truck mounts
  17. O‑Ring Check Valve Assembly
    O‑Ring Check Valve Assembly

    This O-ring goes on the check valve cap and seals the cap to the check valve. Measures 7/8" ID x 1 1/16" OD.

    • O-Ring fits cap on older Prochem brass chemical pumps

     

  18. O‑Ring Y‑Strainer
    O‑Ring Y‑Strainer

    This O-ring is .676 Id x .816 Od. It fits the Y-Strainer for the solution outlet assembly and the bypass manifold assembly for most Prochem and BLUEline units.

  19. Gasket Thermostat Engine
    Gasket Thermostat Engine

    Nissan engine thermostat gasket for model A-15 engines.

    • Paper thermostat gasket for Nissan A12 engine

     

  20. Nissan Rotor
    Nissan Rotor

    Rotor for Nissan engine A12/A15 with electronic ignition.

    • Replacement rotor for Nissan A-12 and A-15 engines
  21. Nissan Distributor Cap
    Nissan Distributor Cap

    Nissan distributor cap for the model A-12 A-15 engine.

    • Replacement cap for distributor
    • Fits Nissan A-12 and A-15 engines

     

  22. Nissan Governor
    Nissan Governor

    Nissan governor for model A-15 engine.

    • Original governor for the Nissan A12 and A15 engines equipped with a carburetor.
  23. Spark Plug Nissan Engine
    Spark Plug Nissan Engine

    Nissan spark plug for model A-12 and A-15 engine. 4 required.

    • Spark plug
View as List Grid

Items 1-24 of 60

Page
per page

Recommended For You