Powerforce 2 (New Style) Pre-Sprayer Replacement Parts
-
PowerForce II Sprayer 250‑1,000 PSIA super-high-quality spray unit for fast and easy application of pre-sprays. The PowerForce hooks into your truck mount solution line and meters chemical at a precise one-to-nine ratio. This allows you to pre-condition with hot pre-spray for excellent penetration and emulsification.
- Works with your truck mount solution line
- No more hand pumping!
- No outlets needed!
$215.63 - Valve Repair Kit
Valve repair kit for both Powerforce and PowerForce II sprayers.
- Valve, repair kit
- 5‑Quart Jug, Clear with Cap (97‑20)
Use this empty 5-quart container with your PowerForce or Hydro-Force sprayer. Keep several on hand for quick changes on the job. Comes with a cap for storage of products.
- Ideal for storage of chemicals; white in color
- Great for transport from one job to another
- Allows for accurate pre-mixing
- Spray Screen No‑Drip
No-Drip Spray Screen. Use with Body CI-200993-EA.
- No-Drip Screen
- Brass Housing
- Dema Engineering Water Nozzle w/ O‑ring (24‑8‑1)
Water nozzle.
- Water nozzle
- For use with Powerforce and Hydro-force Sprayers
- Tubing 1/4‑Inch for PowerForce/Hydro‑Force Sprayer
Tubing 1/4-inch for PowerForce/Hydro-Force Sprayer
- Tubing, sprayers
- Coupler, 1/4"FPT x 1/4"MQD
Our most popular male quick disconnect plug! This brass coupler features heavy-duty double O-rings and works in all high-pressure and high-temperature applications.
- Male connection
- Double O-rings prevent leaking
- Brass construction
- Wand, 18" Stainless Steel Pre‑Sprayer18" Stainless steel pre-sprayer wand.
- 18" Wand Only
- Stainless Steel
- 1/4"
- Assembly, Complete Pre‑Spray WandComplete Pre-sprayer wand assembly.
- Stainless Steel
- 18" OAL
- Comes with 6506 Jet and Filter
- T‑Jet Brass, 6506
This is a brass 6506 T-Jet spray tip.
- In‑Line Solution Filter, 1/4", BrassThis inline solution filter assembly is easy to install and works on most tools with 1/4" fittings. It helps prevent valve wear and clogged jets.
- Brass Housing
- Stainless Steel Filter
- 1/4"M x 1/4"M
- Helps prevent valve wear and clogged jets
- Cap Liner‑UH808
Cap Liner-UH808
- Liner, cap
- Spray Body Female 1/4 Inch
Female ¼” Spray Body for the PowerForce Dial-A-Mix Sprayer.
- Brass Body
- Dial-A-Mix Sprayer
- StrainerStrainer
- Multi‑Sprayer Velcro Strap for OE‑PFS2 (JV7)ea Velcro Strap for OE-PFS2
- Multi‑Sprayer ST810 GunJet Repair Kit (ST810KIT)ea ST810 GunJet Repair Kit
- Dema Engineering Sprayer Metering Tip (100.15.10)
This yellow metering tip works efficiently with either high or low pressure sprayers. When used with a low pressure valve, expect a 4-to-1 dilution ratio. Paired with a high pressure injection sprayer, you can anticipate a dilution ratio of 9 to 1.
- Metering Tip
- Yellow
- For use with Hydro-force and Powerforce sprayers
- Dema Engineering UH808 Cap with Hole (97‑21)
Cap with Hole
- Cap, sprayer
- Spray Body Cap
Cap, Spray Body.
- Brass Cap
- Dema Engineering Injector Valve complete (797.4.1)
Powerforce and Hydroforce injection valve.
- Injection valve complete
$101.80 - High Pressure Hose for PowerForce and Hydro‑Force Sprayers
3,000 PSI hose for Powerforce and Hydroforce sprayers.
- Hose, sprayer
- Dema Engineering Metering Tip Kit (100‑15K)
This Metering Kit is manufactured for use with high- or low-pressure sprayers.
- Metering kit
- 18" Extension Wand
18" Extension Wand
- Wand, extension
- Spray Gun OnlyThis super-duty spray gun allows you to make your own spray wand. It handles up to 4,000 PSI and 300°F and up to 10 gallons per minute. The bottom pivoting trigger allows for low-fatigue use and the special design means heat builds up slowly. Easy to rebuild, too. Sold without a t-jet or quick coupler.
- Rated up to 4000PSI
- Rated up to 300°
- Rated up to 10GPM
$102.10
