Jon-Don R340 Dehumidifier Replacement Parts

120VAC 30A relay.

This filter is a medium efficiency, extended surface pleated panel designed for use in all types of residential, commercial, and industrial air filtration systems. It is the standard filter for the R340 LGR Dehumidifier from Jon-Don, but can also be used with any unit that uses a nominal 12" x 12" x 2" filter.

Leaky dehumidifiers lead to big messes. Protect yourself from secondary damage with this heavy-duty polyethylene pan. It holds up to 7 gallons of water, providing plenty of emergency overflow protection, and fits the most common units used.

This 125V pump is commonly used with the Phoenix R175, R200 and Jon-Don R340 dehumidifiers. It is equipped with a 3/8" check valve barb for the outlet and pumps approximately 30 PSI.

When you need Lay-Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 14-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

This condensate pump vinyl drain hose measures 1/4"ID x 33'L.

Manual humidistat control.

These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, female body. It can withstand temperature ranges between -40° and 180°F.

Plastic Top

Lid hinge.

These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.

12" non marking wheel.

Evaporator Coil for Jon-Don® R340 and Phoenix R250 LGR.

Condenser coil

Phoenix dehumidifier thermistor used on R175, R250, 200HT, 270HTX, Ultimate 340, R340