Prospector 500 w/Heat Portable Extractor Replacement Parts
-
PumpTec Series 207V Pump Assembly (80‑0016)PumpTec Series 207V 500 PSI pump assembly for Jon-Don Prospector 500H.
- PumpTec
- 500PSI
- Pump and Motor Assembly
$1,182.00 - Ametek 2 Stage Vacuum Motor (116392‑00)
2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.
- 2 stage vacuum motor
- 5-5/8” diameter
- 80” water lift
- Lamb # 116392-00
- Pressure Regulator 500 psi
500 psi Pressure Regulator with adjustable rating of 50-500 psi .
- Brass Regulator
- Adjustable 50-500 psi
$107.12 - Gauge, Water Pressure
1500 PSI Water Pressure Gauge.
- 2-1/2" Panel Mount
- 0-1500PSI
- White Face
- Valve, Drain 1 1/2"
1-1/2" Drain Valve including the spout and gasket.
- Plastic Drain Valve-1-1/2”
- Includes the Spout and Gasket
- Gasket, Vacuum MotorThis gasket fits the 5-5/8" vacuum motors.
- Foam
- For use with 5-5/8" vacuum motors
- Self Adhesive
- Switch, 1" Square Single Throw Rocker
Rocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.
- Single Throw
- Lighted
- Green Rocker Switch
- Extension Cord, 25 ft, 12 Gauge (10‑0860)25' Extension Cord
- Extension Cord
- 12/3 x 25'
- High Visibility Yellow
- Sandia Ht Sensor for Xtrctr (10‑0814)ea Heat Sensor for Xtrctr
- Century 400 Pressure Gauge for Ninja Warrior (8.632‑331.0)OEM panel mounted pressure gauge 0-600 PSI.
- Century 400
- 0-600 PSI
- 1/4" MPT
- Assembly, Prospector® Series Float Filter
Float/filter assembly for the Prospector Series portable extractors.
- Float and Filter
- 1-1/2" Slip Fitting
- PVC Elbow Comes With Filter
- Caster, Prospector® Series Front
Caster, 3-1/2", non marking wheel.
- 3-1/2"
- Non Marking
- Ball Bearing Swivel
- Wheel, 10" Rear
10" x 1-3/4" rear non-marking wheel.
- 10" x 1-3/4"
- Non Marking
- "Xtra Soft"
- Wheel
- Pigtail, 6" Power Cord
Corded pigtail wire.
- 14-3 Wire
- 6" Long
- Molded Male Plug End
- Assembly, Lid and Ring
Prospector hatch and ring assembly
- 6-1/2" Textured Lid with 'T' Handle
- Comes with O-ring and Mounitng Ring
- Works for All Models of Prospector Portable Extractors
- Coupler, 1/4"FPT x 1/4"FQD
The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.
- Double EPDM O-Rings
- Brass Construction
- 1/4"
- Flow Control K‑Valve
This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.
- Withstands pressures up to 500 PSI
- Easily rebuildable
- Castex/Nobles/Tennant Filter Solution Tank (180628)
Mushroom shaped stainless steel filter for solution tank.
- 100 Mesh
- Stainless Steel
- Mushroom Filter
- Barb 1‑1/2" x 1‑1/2" Hose
Hose Barb 1.5 MPT x 1.5H
- Hose Barb
- 1-1/2" MPT x 1-1/2" Hose Barb
- PVC
- Relief, 12 Gauge Cord Strain
Strain Relief 12 Gauge made from heavy duty plastic.
- Strain Relief
- 12 Guage Cord
- 1/2" Male Thread
- Fits Most Portable Extractors
