This is the pump head and motor assembly for the 500PSI pump in the Prospector series portable extractors. Equipped with a 120V 1/3HP Marathon motor.
The pump motor does not come with wires connected. at the back end of the pump you will find what looks to be two cut wires, this is purposed. Also on the back end of the pump there is a small plate held in with 2 screws (5/16" or flat head screw driver) once removed there are prongs that the existing wire connectors will connect to. Then replace the plate with the connected wires coming out of the bottom and the unit will be powered.
|PSI||0 - 500|
|Model||120 Volt AC|
|Manufacturer Model Number||80-00016|