Ermator T8600 Replacement Parts
-
Propane Clutch for T8600 (201400512)
This replacement propane clutch is designed for the Ermator T8600 vacuum/dust collector.
$1,578.06 -
Ermator Valve Disk/Sealing Kit (200600652)
This 3-inch valve disk and gasket sealing kit fits the Ermator T7500 and T8600 dust collectors.
$196.75 -
Hubcap for Ermator T7500/T8600 (1342007)
This replacement hubcap fits the large front wheel of the Ermator T7500 and T8600 dust collectors. Each hubcap is sold individually and is easy to install.
-
Ermator Y‑Pipe (201000021)
This Ermator Y-Pipe allows users to connect two vacuum hoses to one Ermator unit. This 3" x 3" x 3" pipe fits the Ermator T8600 and T7500 dust collectors and connects to any 3" vacuum hose.
- Fits Ermator T8600 and T7500 dust collectors
- Camlock end
- Connects multiple grinders to one Ermator dust extractor
$428.34 -
Aluminum Female Camlock Connector, 3 Inch (200800367)This 3-inch aluminum female camlock connects a 3-inch vacuum hose to Ermator's T7500, T8600, and T10000 dust collectors.
- 3-inch female camlock
- Aluminum construction
- Connects 3-inch vacuum hose to Ermator dust collectors
-
T‑Line HEPA Filter for Ermator T7500 & T8600 Dust Extractors
This T-Line HEPA filter fits the Ermator T7500 and T8600 Dust Extractors. It provides 99.99% efficiency at 0.3 microns, ensuring the air on your job site is clean and virtually dust-free.
$419.84 -
Filter Sock Assembly for Ermator T7500 & T8600 Dust Extractors
This replacement filter sock assembly fits the Ermator T7500 and T8600 dust extractors.
$1,666.78 -
Replacement Rubber Blade Set for 18‑Inch Ermator Floor Tool
These replacement rubber blades fit the Ermator Floor Tool. Packaged with one long and one slightly shorter blade.
- Includes one long and one short blade
- Long blade measures 17 1/4"
- Short blade measures 15 1/2"
- Designed to fit the Ermator Floor Tool
-
Ermator Floor Tool
This 18" floor tool connects to a 2" wand. It is designed to smoothly glide along hard floors.
- 18" width
- Connects to 2" wand, standard on all Ermator units
- Smoothly glides along the floor
- For use with dust collectors and flood extraction units
-
Camlock Reducer Connector (201000029)Camlock Reducer Connector$224.73
-
Ermator T‑Line Hose 3" x 33' ConductiveThis 3" T-line hose from Ermator measures 33 feet long. It is compatible with the Ermator T8600 Dust Collector.
- Replacement hose
- 3" diameter and 33-foot length
- Compatible with Ermator T8600
$830.46 -
Vacuum Hose Cuff, Fits 2‑Inch Hose x 2‑Inch ToolThis vacuum hose cuff will connect a 2-inch hose to a 2-inch tool or a variety of other 2-inch utility accessories.
- Hose cuff
- 2"H x 2"T
-
Propane Cylinder, 20lbs capacity, Steel Burnisher Vapor Tank
This spare propane tank fits most propane-powered equipment. It is compatible with the Scanmaskin 800, Ermator T8600, and Pioneer Eclipse propane units.
- Steel propane tank
- 20 lbs capacity
- Quick connect fitting
- For use with certain concrete grinders, dust collectors, and floor buffers
$590.01 -
Wheel/Tire for Ermator T7500 and T8600 Solid, Rear (201200062)
This solid, rear wheel/tire fits the Ermator T8600 HEPA Dust Extractor.
$320.74 -
Ermator Front Swivel Caster Wheel for T7500 and T8600 (25320)
This replacement front caster wheel fits the Ermator T7500 and T8600 dust collectors. This wheel offers 360° swivel for full maneuverability. It easily and securely bolts to the frame.
- Swivels for ease of use
- Easily to replace; bolts on to unit
- Sold individually
$102.23