Please select a Shopping List

Century Ninja Dual 2 Stage, 200/500 PSI w/Heat Replacement Parts

View as List Grid

Items 1-24 of 25

Page
per page
  1. Valve, Drain 1 1/2"
    Valve, Drain 1 1/2"

    1-1/2" Drain Valve including the spout and gasket.

    • Plastic Drain Valve-1-1/2”
    • Includes the Spout and Gasket
  2. Flow Control K‑Valve
    Flow Control K‑Valve

    This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.

    • Withstands pressures up to 500 PSI
    • Easily rebuildable
  3. PumpTec 207 Series Complete Pump (80547)
    PumpTec 207 Series Complete Pump (80547)

    This 207 Gold Series pump replaces the 205 series. This complete pump assembly has a 120V, 1/3 HP motor and provides an adjustable 500 PSI. It pumps at a rate of 1.4 GPM at 500 PSI and can withstand a maximum of 160°F of water inlet temperature.

    • Replaces 205 series pump
    • Adjustable 500 PSI
    • Complete pump and motor
    • 1/3 HP; 3.0 /1.5 amps
    • 1.4 GPM at 500 PSI
  4. PumpTec 112T Series Pump Motor Set, 120V (112T‑075/M35‑8)
    PumpTec 112T Series Pump Motor Set, 120V (112T‑075/M35‑8)
    The Pumptec 112T series pump features an efficient plunger-type design that produces up to 20% more pressure or flow for a given power input compared to competitive pumps. This pump is ideal for pressure cleaning, pest spraying, and misting applications.
    • Plunger-type design for ultimate pumping efficiency
    • 200 PSI
    • Four 1/4” ports
    • Non-Viton Buna seals
    • 120 volt
  5. PumpTec 112 Series Pump Head (60002)
    PumpTec 112 Series Pump Head (60002)

    Pump Head PumpTec 112 Series without motor.

    • PumpTec
    • Series 112T Pump Head
    • 200 PSI
  6. PumpTec M35 Pump Motor (M70)
    PumpTec M35 Pump Motor (M70)

    M35 1/7HP 120v 1.5amp motor used for the 112T/V (112 Series) pump head.

    • PumpTec
    • 1/7HP
    • 120V
    • For Use with 112T/V Pump Head
  7. Ametek M53 Upgrade Short Base Motor (B4CPM‑164)
    Ametek M53 Upgrade Short Base Motor (B4CPM‑164)
    M53 Short Base Motor.
    • Ametek
    • 12VDC with Rectifier
    • For Use with PumpTec Series 205/207 Pumps
  8. Ametek 2 Stage Vacuum Motor (116392‑00)
    Ametek 2 Stage Vacuum Motor (116392‑00)

    2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.

    • 2 stage vacuum motor
    • 5-5/8” diameter
    • 80” water lift
    • Lamb # 116392-00
  9. ea Blower Gasket
    ea Blower Gasket
    This gasket fits the 5-5/8" vacuum motors.
    • Foam
    • For use with 5-5/8" vacuum motors
    • Self Adhesive
  10. Toggle Switch
    Toggle Switch

    Toggle Switch

    • 2 prong toggle switch
    • 120 volt
  11. Century 400 Manual Temp Reset Switch (130‑14C)
    Century 400 Manual Temp Reset Switch (130‑14C)

    Ninja Classic heater resettable thermostat

    • Century 400
    • Resettable Thermostat
    • For Century Ninja Classic Heater
  12. Elbow, 1.5 FS x 1.5 FPT
    Elbow, 1.5 FS x 1.5 FPT

    Elbow 1.5 FS x 1.5 FPT

    • 1.5 pvc elbow fitting
  13. Toggle Switch Rubber Boot (130990)
    Toggle Switch Rubber Boot (130990)
    Toggle switch boot.
    • Toggle Switch Boot
  14. PumpTec Series 205, 207 Kit B
    PumpTec Series 205, 207 Kit B
    PumpTec 205 and 207 check valve kit, kit B.
    • PumpTec
    • Kit B Check Valves
    • Series 205 and 207 Pump Heads
  15. Castex/Nobles/Tennant Filter Solution Tank (180628)
    Castex/Nobles/Tennant Filter Solution Tank (180628)

    Mushroom shaped stainless steel filter for solution tank.

    • 100 Mesh
    • Stainless Steel 
    • Mushroom Filter
  16. Coupler, 1/4"FPT x 1/4"FQD
    Coupler, 1/4"FPT x 1/4"FQD

    The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.

    • Double EPDM O-Rings
    • Brass Construction
    • 1/4"
  17. Axle  1pc ‑ New Style
    Axle 1pc ‑ New Style

    This new-style axle is made to fit Ninja portable units manufactured by Century 400 that use the 1 piece axle system.

    • Axle  1pc - New Style
  18. Axle for 500PSI Ninja
    Axle for 500PSI Ninja

    Axle for 500PSI Ninja

    • Axle for 500PSI Ninja
  19. Wheel, 4" Swivel Caster
    Wheel, 4" Swivel Caster

    New style 4" swivel caster.

    • 4"
    • Swivel
    • Steel Base
    • Non Marking Grey Wheel
  20. Wheel Rear Ninja, 10"
    Wheel Rear Ninja, 10"

    This wheel fits the Century Ninja Extractors that use 10-inch wheels with a 1/2 inch shaft.

    • Wheel Rear Ninja 10"
  21. Relief, 12 Gauge Cord Strain
    Relief, 12 Gauge Cord Strain

    Strain Relief 12 Gauge made from heavy duty plastic.

    • Strain Relief 
    • 12 Guage Cord
    • 1/2" Male Thread 
    • Fits Most Portable Extractors 
    • Draw Latch Assembly
      Draw Latch Assembly

      Draw Latch

      • Easy to install
      • Fits Ninja 400 series units
    • Single Carbon Brush
      Single Carbon Brush

      Carbon Brushes

      • Carbon Brush
      • Sold Individually
      • For Use with Century Ninja
    View as List Grid

    Items 1-24 of 25

    Page
    per page

    Recommended For You