Please select a Shopping List

Blueline ThermalWave Vortec Replacement Parts

 Schematic

View as List Grid

Items 1-24 of 47

Page
per page
  1. Brass Adapter, FGH x 3/8"M (194‑C)
    Brass Adapter, FGH x 3/8"M (194‑C)
    3/8"MPT x FGH brass adapter.
    • Brass
    • 3/8"M x FGH
    • Adapter
    • 89GH126
  2. Truck Mount Pump Out System
    Truck Mount Pump Out System

    Featuring a 12VDC motor this diaphragm waste pumpout produces consistent, smooth pulsation to prevent misdirected wastewater flooding. This pump can be run dry for short periods without causing damage to the pump.

    • 0.5HP drive motor
    • Diaphragm pump by COMET USA
    • For use with any truck mount system
  3. Bostik, 1100 Fast Set
    Bostik, 1100 Fast Set

    Bostik 1100 Adhesive Urethane Sealant is a high-quality urethane sealant/adhesive.

    • Urethane Adhesive
    • Waterproof
    • Completely Sets in 100 Minutes
  4. Mobil 1 102481 Synthetic Grease
    Mobil 1 102481 Synthetic Grease

    Lubricating grease specially formulated for use with truck mount blowers. See manufacturer's recommendations for lubricating schedule.

    • Effective with U-joints and blowers
  5. Cap Water Box
    Cap Water Box

    Water box cap.

    • Cap, water box
  6. Barb, 1/8"MPT x 5/16"H Brass
    Barb, 1/8"MPT x 5/16"H Brass
    1/8"MPT x 5/16"H brass hose barb.
    • Brass
    • 1/8" x 5/16"
    • 125-5A
    • Straight
  7. Y Strainer for Prochem Truck Mounts
    Y Strainer for Prochem Truck Mounts

    Y Strainer used on all Prochem truck mounts.

    • Brass Y-Strainer
  8. Ball‑Valve, 3 Way Chemical Selector
    Ball‑Valve, 3 Way Chemical Selector

    Chemical selector valve has 3-way setting: off, prime, and chemical. Fits most Prochem, BLUEline, HydraMaster and Sapphire Scientific truck mount units.

    • Ball-Valve
    • 3 Way
    • Chemical selector
  9. Valve, Ball Dump 1 1/2"
    Valve, Ball Dump 1 1/2"

    1 1/2" Ball Dump Valve fits nearly all truck mounts in the industry.

    • Valve, waste systems
  10. Outlet Check Valve Assembly
    Outlet Check Valve Assembly

    Outlet Check Valve Assembly used on all Prochem, BLUEline and Sapphire Scientific models.

    • Valve, outlet check
  11. Valve, Chemical Metering
    Valve, Chemical Metering

    This 1/8" female pipe thread chemical metering valve will fit most Prochem, BLUEline, Sapphire Scientific and HydraMaster units.

    • SwageLok Valve
    • Needle Valve
    • 1/8"
  12. Dwyer Instruments FlowMeter (VFA‑42)
    Dwyer Instruments FlowMeter (VFA‑42)

    2-10 GPH flow meter fits most truck mounts in the industry.

    • Meter, flow
  13. Water Temp Gauge
    Water Temp Gauge

    Water Temp Gauge

    • Gauge, water temp
  14. Lubrication Cup
    Lubrication Cup

    Lubrication Cup

    • Cup, lubrication
  15. Sensor, Low Pressure
    Sensor, Low Pressure

    Low pressure sensor.

    • Sensor, low pressure water
  16. Ignition Switch
    Ignition Switch

    Engine ignition switch with key for older large Prochem truck mounts and BLUEline truck mounts.

    • Switch, ignition
  17. Circuit Breaker, 30A
    Circuit Breaker, 30A
    30A 12V Circuit breaker.
    • Circuit Breaker
    • 30A
    • Resettable
    • 30-007
  18. Circuit Breaker, 20A
    Circuit Breaker, 20A

    20-amp, 12-volt circuit breaker is easy to install and resettable.

    • Circuit Breaker
    • 20A
    • Resettable
    • 30-008
  19. Hour Meter
    Hour Meter

    Round hour meter used on ALL Prochem and BLUEline truck mounts.

    • Hour meter
  20. Sensor, Temperature Gauge
    Sensor, Temperature Gauge
    Temperature gauge sensor.
    • Variable Temperature Sensor
    • For Use with Various Styles of Truckmount
    • Free Technical Support
  21. Chemical Pump Check Valve (42‑809265)
    Chemical Pump Check Valve (42‑809265)

    This check valve fits most Prochem stainless steel chemical pumps.

    • Check Valve
    • For Use with Many Prochem and HydraMaster Chemical Pumps
    • Ships Same Day
  22. O‑Ring Y‑Strainer
    O‑Ring Y‑Strainer

    This O-ring is .676 Id x .816 Od. It fits the Y-Strainer for the solution outlet assembly and the bypass manifold assembly for most Prochem and BLUEline units.

  23. Float Switch, Recovery Tank
    Float Switch, Recovery Tank

    This recovery tank level kill switch can also be used as the pump-out activation switch. This switch fits most BLUEline and some HydraMaster units.

    • 1 1/2" pipe thread
    • Prochem
    • HydraMaster
    • BlueLine Equipment
    • Sapphire Scientific 
  24. Knob, 1/4‑20 Thumb (11‑007)
    Knob, 1/4‑20 Thumb (11‑007)

    Heavy duty flower thumb knob.

    • Cover Thumb Nut
    • 1/4-20 Thread
View as List Grid

Items 1-24 of 47

Page
per page

Recommended For You