Please select a Shopping List
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Used Concrete Floor Grinders and Polishing Equipment

All Equipment is backed with a 30-Day, Money-Back Satisfaction Guarantee and a 90-Day Used Equipment Warranty!

 

All used/demo equipment has been thoroughly evaluated by Jon-Don's Service Team and restored to manufacturer specifications.

 

Check out our selection of New Concrete Floor Grinders from Skanmaskin.

View as List Grid

8 Items

per page
  1. Scanmaskin Scan Combiflex 800 Propane Floor Grinder with Water Tank (DEMO/USED)
    Scanmaskin Scan Combiflex 800 Propane Floor Grinder with Water Tank (DEMO/USED)

    Got a large commercial job or big outdoor project with limited access to power? Try the Scan Combiflex 800P. You'll get powerful, productive grinding power that's 100% fueled by propane, plus a built-in 6-gallon water tank. This machine puts all the torque on the floor, not on your hip!

    • Demo/Used Unit - Limited Quantities Available
    • Production rates of 900–1,550 square feet per hour
    • All steel construction
    • Ergonomic and user-friendly controls
    • Designed for high productivity in large areas
    • 6-gallon water tank included
  2. Scanmaskin Scan Combiflex 800 Floor Grinder (DEMO/USED)
    Scanmaskin Scan Combiflex 800 Floor Grinder (DEMO/USED)

    For big commercial projects with lots of paint, coatings, or overlay to remove, the Scan Combiflex 800 from Scanmaskin is the heavy-duty floor grinder you need. It delivers production rates of 750–1,290 square feet per hour. Plus, its unique engineering puts more torque on the floor—not on your hip!

    • Demo/Used Unit - Limited Quantities Available
    • Production rates of 750–1,290 square feet per hour
    • 480V model available
    • All steel construction—right down to the dust shroud
  3. Scanmaskin Scan Combiflex 18 Single‑Phase Floor Grinder, 110V (DEMO/USED)
    Scanmaskin Scan Combiflex 18 Single‑Phase Floor Grinder, 110V (DEMO/USED)

    The Scan Combiflex 18 from Scanmaskin is an ultra-tough, all-steel floor grinder that is engineered to put more torque on the floor—not on your hip! This 18-inch machine delivers production rates of around 300–556 square feet per hour while using less than 15 amps.

    • Demo/Used Unit - Limited Quantities Available
    • 18-inch cutting path
    • 110-volt configuration
    • Delivers 300–1,100 RPM
    • Stainless steel dust shroud
  4. LAVINA 30L‑S (Low Profile) Planetary Grinder, Three‑Phase, 230V (DEMO/USED)
    LAVINA 30L‑S (Low Profile) Planetary Grinder, Three‑Phase, 230V (DEMO/USED)

    The 30L-S combines three machines into one, making it a super smart investment. This workhorse is a concrete grinder, polisher, and floor machine all in one. That’s right—after grinding and polishing the floor, you can use this machine for daily maintenance! This unit has 179 hours of use and is in very good condition.

    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Low-profile base reaches beneath cabinets and shelving
    • Three heads and 30” of working area maximize square footage efficiency
    • Heavy-duty model: over 390 lbs of grinding pressure 
  5. LAVINA 32‑S‑HV (High Voltage) Planetary Grinder, Three‑Phase, 380‑480V (DEMO/USED)
    LAVINA 32‑S‑HV (High Voltage) Planetary Grinder, Three‑Phase, 380‑480V (DEMO/USED)

    The 32-S is the heaviest and most powerful LAVINA floor grinder on the market today. The 32-S has six 9-inch grinding heads that deliver a huge 32” working area.

    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Powerful 20 HP motor, 380/480V
    • Six heads and 32” of working area maximize square footage efficiency
    • Heavy-duty model: over 800 lbs of grinding pressure
  6. LAVINA 32‑S‑HV (High Voltage) Planetary Grinder Three‑Phase, 380‑480V (DEMO/USED)
    LAVINA 32‑S‑HV (High Voltage) Planetary Grinder Three‑Phase, 380‑480V (DEMO/USED)

    The 32-S is the heaviest and most powerful LAVINA floor grinder on the market today. The 32-S has six 9-inch grinding heads that deliver a huge 32” working area.

    • Demo/Used Unit - Limited Quantities Available
    • Ideal solution for big box retail projects
    • Powerful 20 HP motor, 380/480V
    • Six heads and 32” of working area maximize square footage efficiency
    • Heavy-duty model: over 800 lbs of grinding pressure 
  7. Blast Pro BRB 2800 Ride‑On Floor Scraper (DEMO/USED ‑ 7 HRS)
    Blast Pro BRB 2800 Ride‑On Floor Scraper (DEMO/USED ‑ 7 HRS)

    This revolutionary machine is designed to tackle the toughest projects and makes removing a wide range of materials faster, easier and more effective than those out of date jack hammers and hand scrapers. This unit has been lightly used for demos and has 7 hours on the engine. It is in like-new condition.

    • Demo/Used Unit - Limited Quantities Available
    • Save on time and labor
    • Removes a variety of floor coatings and toppings
    • Different blade sizes available 
  8. LAVINA 13‑S Edger Single‑Phase, 220V (DEMO/USED)
    LAVINA 13‑S Edger Single‑Phase, 220V (DEMO/USED)

    The LAVINA 13-S Edger has a grinding path of 13.2" and makes grinding edges a breeze. With features like a level built-in to the head along with an adjustable head makes getting a flat grind on uneven floors easier than ever.

    • Demo/Used Unit - Limited Quantities Available
    • Unique design allows operators to blend edge work and eliminate lines
    • 3 HP, single phase, 220V
    • Built-in level ensures flatness of the floor during work
    • Great for polishing or grinding
View as List Grid

8 Items

per page

Recommended For You