Shaw Total Care Carpet STAIN & SOIL Remover Concentrate
- Provides protection against recurring spots
- Effective on both water-and oil-based spots
- pH: 7.0–8.0
- CRI and WoodSafe® approved
- Variable dilutions
Product Information
Enjoy a Deep-Down Superior Clean + Long-Lasting Stain Protection
Superior Cleaning Power
Total Care STAIN & SOIL Remover tackles the toughest soils and stains, even old “set-in” stains release and flush away. It can be used as a pre-spray/extraction cleaner, an interim product for the encapsulation process, or a spot cleaner.
No-Rinse, Residue-Free Formula
Total Care STAIN & SOIL Remover combines specially selected nonionic and anionic surfactants with unique fluorocarbon anti-soiling chemistry.
There is no need to rinse or neutralize treated fibers after using this product. It deep cleans fibers while leaving a protective treatment on the surface that guards against future stains and soils. There are no sticky, soil-attracting residues and no stiff fibers either—just clean, soft carpet.
Long-Lasting Stain Protection
Total Care STAIN & SOIL Remover not only removes stubborn stains and soiling, but it also provides protection against reoccurring spots. Formulated with a protective treatment, just-cleaned carpet resists stains and soiling. Spots and spills wipe up easier, plus less labor is required during subsequent professional cleanings.
Use on Multiple Fiber Types
Total Care STAIN & SOIL Remover can be used on both commercial and residential stain-resistant carpet, rugs, wool, and all other water-safe fibers. It has been approved by the Carpet and Rug Institute (CRI) and WoolSafe®.
Usage
Always test the surface to be cleaned for compatibility, and colorfastness, by applying a small amount of the TOTALCARE STAIN & SOIL Remover to an inconspicuous area.
Spotter:
- Dilute 1:10 with water.
- Spray soiled area with TOTALCARE STAIN & SOIL Remover.
- Agitate, and blot with a clean white cloth.
- Allow the area to dry for 15 to 30 minutes.
- For stubborn stains, it may be necessary to repeat the cleaning process.
- If needed, softly brush the area during application.
Pre-Spray:
- Dilute 1:32 with water.
- Pre-spray diluted TOTALCARE STAIN & SOIL Remover at 200 square feet per gallon. Agitation is recommended.
- Allow to dwell on the area for 5 to 10 minutes to penetrate into the fibers and loosen the soil. (Do not allow product to dry.)
- Extract using only clean hot water.
Encapsulation:
- Dilute 1:32 with water.
- Pre-spray diluted TOTALCARE STAIN & SOIL Remover at 1,000 square feet per gallon.
- Use appropriate equipment for agitation (counter-cylindrical brushes recommended).
- A post-treatment vacuum is recommended after drying.
Specifications
| Material | Carpet |
|---|---|
| Color | Yellow |
| Category | Carpet Pre-Sprays (TLC), Encapsulation, Shaw Approved, Spotters |
| pH | 7.0 - 8.0 |
| Spot Type | All Purpose |
| Brand | Shaw |
| Chemical Type | Water Based |
| Cleaning Method | Encapsulation, Hot Water Extraction, Spotting |
| Type | Liquid |
| Condition | new |
| Manufacturer Model Number | TC SSC G01C |
| Scent | Pleasant |