Prochem T Quad-Jet Wand Replacement Parts
-
Kit, Prochem Valve RebuildIncludes 4 O-rings, spring, and cap/stem body. STEM NOT INCLUDED.
- Prochem wand valve repair kit
- Fits most Prochem wands and stair tools
- Will not fit the 2 jet wands
-
Prochem Solution Valve (61‑950496)Prochem wand and stair tool valve.- This replacement valve fits most Prochem wands and stair tools
- Will NOT fit some of the 2 jet wands
$170.51 -
Tube Assembly, Jet Manifold Titanium 4 Jet & 6 Jet WandTube Assembly-Jet Manifold Titanium 4 Jet & 6 Jet Wand. Old & New Style
$109.67 -
Left PC for Manifold
Left PC for Manifold
- Left side manifold for 4 jet titanium wand
-
Right PC for Manifold
Right PC for Manifold
- Right side manifold for 4 jet titanium wand
$100.68 -
Hold Down Wand Handle 2
Hold Down Wand Handle 2
- Bottom bracket for upper wand handle
-
Body Wand Handle 2 TubeBody Wand Handle 2 Tube
- Upper wand handle for Titanium wand
$119.15 -
Prochem Wand Trigger (52‑501619)Prochem wand and stair tool replacement trigger.
- Replacement Trigger
- For Use with Prochem Stair Tools and Prochem 4/6 Jet Wands
-
Decal for Titanium Wand
Decal for Titanium Wand
- Adhesive decal set
-
O‑Ring, Prochem StemO-Ring for the stem in the Prochem valve.
- O-Ring .114 ID .254 OD
- Fits Prochem valve
- Used on Prochem wand, stair tool, and upholstery tool
-
Washer, Nylon Spray TipNylon washer, fits the filter used with a tee-jet. Also used in the solution in line filter (MP-SILF-EA).
- Washer, nylon
-
Seat, Prochem Valve StemSeat, located under the cap of the Prochem solution valve.
- Seat
- For use with the Prochem valve only
-
Spring, Prochem Valve StemProchem stem spring, for Prochem solution valve. Available with repair kit, PN: PC-66808169-EA.
- Spring
- For use with Prochem solution valve only
-
Compression, 1/4"T x 1/8"M Brass1/4"T x 1/8"MPT brass compression fitting.- Brass
- 1/4"T x 1/8"FPT
- Compression Fitting
- 12-800322
-
Hex Nipple, 1/8"MPT x 1/4"Flare, Brass1/8"M x 1/4" flare brass nipple.- Brass
- 1/8"MPT x 1/4"F
- Connector
- 48-4A
-
Screw, 10‑32 x 1/4 SS10-32 x 1/4" screw for the manifold on the Prochem Titanium Quad Jet Wand.
- Screw, manifold
-
Socket Head Screw 10‑32 x 3/8, SSScrew 10-32 x 3/8 SS
- Screw
-
Screw Cap 1/4 20 x 1 1/4 SocketScrew Cap 1/4 20 x 1 1/4 Socket
- Cap screw
-
V‑Jet 95015, Stainless Steel, 1/8 Inch95015 Jet -
V‑Jet 110015, Stainless Steel, 1/8 InchStainless Steel V-jets provide a 110 degree spray angle.
-
Adapter, T‑JetThis is a brass T-Jet adapter with 1/4" female thread. Often used in the MP-SILF-EA assembly.
-
In‑Line Solution Filter, 1/4", BrassThis inline solution filter assembly is easy to install and works on most tools with 1/4" fittings. It helps prevent valve wear and clogged jets.- Brass Housing
- Stainless Steel Filter
- 1/4"M x 1/4"M
- Helps prevent valve wear and clogged jets
-
Coupler, 1/4"FPT x 1/4"MQDOur most popular male quick disconnect plug! This brass coupler features heavy-duty double O-rings and works in all high-pressure and high-temperature applications.
- Male connection
- Double O-rings prevent leaking
- Brass construction
-
Spray Screen RegularThis standard brass filter screen with fine mesh saves you from having to clean jets at every job. It has no check ball or spring.
- Brass filter with fine mesh filters unwanted debris
- Saves you from cleaning jets at every job
- No check ball or spring