Please select a Shopping List

Prospector 300 w/Heat Portable Extractor Replacement Parts

View as List Grid

12 Items

per page
  1. Relief, 12 Gauge Cord Strain
    Relief, 12 Gauge Cord Strain

    Strain Relief 12 Gauge made from heavy duty plastic.

    • Strain Relief 
    • 12 Guage Cord
    • 1/2" Male Thread 
    • Fits Most Portable Extractors 
    • Barb 1‑1/2" x 1‑1/2" Hose
      Barb 1‑1/2" x 1‑1/2" Hose

      Hose Barb  1.5 MPT x 1.5H

      • Hose Barb
      • 1-1/2" MPT x 1-1/2" Hose Barb
      • PVC
    • Ametek 2 Stage Vacuum Motor (116392‑00)
      Ametek 2 Stage Vacuum Motor (116392‑00)

      2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.

      • 2 stage vacuum motor
      • 5-5/8” diameter
      • 80” water lift
      • Lamb # 116392-00
    • Coupler, 1/4"FPT x 1/4"FQD
      Coupler, 1/4"FPT x 1/4"FQD

      The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.

      • Double EPDM O-Rings
      • Brass Construction
      • 1/4"
    • Switch, 1" Square Single Throw Rocker
      Switch, 1" Square Single Throw Rocker

      Rocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.

      • Single Throw 
      • Lighted 
      • Green Rocker Switch 
    • ea Blower Gasket
      ea Blower Gasket
      This gasket fits the 5-5/8" vacuum motors.
      • Foam
      • For use with 5-5/8" vacuum motors
      • Self Adhesive
    • Castex/Nobles/Tennant Filter Solution Tank (180628)
      Castex/Nobles/Tennant Filter Solution Tank (180628)

      Mushroom shaped stainless steel filter for solution tank.

      • 100 Mesh
      • Stainless Steel 
      • Mushroom Filter
    • Valve, Drain 1 1/2"
      Valve, Drain 1 1/2"

      1-1/2" Drain Valve including the spout and gasket.

      • Plastic Drain Valve-1-1/2”
      • Includes the Spout and Gasket
    • Wheel, 10" Rear
      Wheel, 10" Rear

      10" x 1-3/4" rear non-marking wheel.

      • 10" x 1-3/4"
      • Non Marking 
      • "Xtra Soft"
      • Wheel
    • Caster, Prospector® Series Front
      Caster, Prospector® Series Front

      Caster, 3-1/2", non marking wheel.

      • 3-1/2" 
      • Non Marking
      • Ball Bearing Swivel
    • Flow Control K‑Valve
      Flow Control K‑Valve

      This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.

      • Withstands pressures up to 500 PSI
      • Easily rebuildable
    View as List Grid

    12 Items

    per page