Please select a Shopping List

Prospector 150 w/Heat Portable Extractor Replacement Parts

View as List Grid

18 Items

per page
  1. Wheel, 10" Rear
    Wheel, 10" Rear

    10" x 1-3/4" rear non-marking wheel.

    • 10" x 1-3/4"
    • Non Marking 
    • "Xtra Soft"
    • Wheel
  2. Caster, Prospector® Series Front
    Caster, Prospector® Series Front

    Caster, 3-1/2", non marking wheel.

    • 3-1/2" 
    • Non Marking
    • Ball Bearing Swivel
  3. Assembly, Prospector® Series Float Filter
    Assembly, Prospector® Series Float Filter

    Float/filter assembly for the Prospector Series portable extractors.

    • Float and Filter 
    • 1-1/2" Slip Fitting
    • PVC Elbow Comes With Filter
  4. Relief, 12 Gauge Cord Strain
    Relief, 12 Gauge Cord Strain

    Strain Relief 12 Gauge made from heavy duty plastic.

    • Strain Relief 
    • 12 Guage Cord
    • 1/2" Male Thread 
    • Fits Most Portable Extractors 
    • Barb 1‑1/2" x 1‑1/2" Hose
      Barb 1‑1/2" x 1‑1/2" Hose

      Hose Barb  1.5 MPT x 1.5H

      • Hose Barb
      • 1-1/2" MPT x 1-1/2" Hose Barb
      • PVC
    • Ametek 2 Stage Vacuum Motor (116392‑00)
      Ametek 2 Stage Vacuum Motor (116392‑00)

      2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.

      • 2 stage vacuum motor
      • 5-5/8” diameter
      • 80” water lift
      • Lamb # 116392-00
    • Coupler, 1/4"FPT x 1/4"FQD
      Coupler, 1/4"FPT x 1/4"FQD

      The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.

      • Double EPDM O-Rings
      • Brass Construction
      • 1/4"
    • Assembly, Lid and Ring
      Assembly, Lid and Ring

      Prospector hatch and ring assembly

      • 6-1/2" Textured Lid with 'T' Handle
      • Comes with O-ring and Mounitng Ring
      • Works for All Models of Prospector Portable Extractors
    • Pigtail, 6" Power Cord
      Pigtail, 6" Power Cord

      Corded pigtail wire.

      • 14-3 Wire
      • 6" Long
      • Molded Male Plug End
    • Aquatec Pump, Demand 115 VAC, 120 PSI (AQFLC120)
      Aquatec Pump, Demand 115 VAC, 120 PSI (AQFLC120)

      This replacement 120 PSI pump draws 115VAC and delivers a flow rate of 1.4 GPM. This self-priming pump can withstand a maximum temperature of 170°F and is capable of running dry.

      • Replacement 120 PSI pump
      • 115 VAC
      • 1.4 GPM
      • Demand pump
      • Max temperature 170°F (77°C)
    • AquaTec 170 PSI Pump (58‑FLC‑170)
      AquaTec 170 PSI Pump (58‑FLC‑170)

      115V 1.3GPM 170 PSI ShurFlo pump with Viton check valves. Pump is equipped with 125 PSI demand switch which allows it to be used with low flow rate tools such as upholstery and stair tools. This pump can be used in nearly any application where a 100 PSI pump is currently used.

      • Replacement 170 PSI SHURflo pump
      • 115 VAC
      • 1.3 GPM
      • Demand pump
      • Max temperature 180°F (82°C)
    • Extension Cord, 25 ft, 12 Gauge (10‑0860)
      Extension Cord, 25 ft, 12 Gauge (10‑0860)
      25' Extension Cord
      • Extension Cord
      • 12/3 x 25'
      • High Visibility Yellow
      • Switch, 1" Square Single Throw Rocker
        Switch, 1" Square Single Throw Rocker

        Rocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.

        • Single Throw 
        • Lighted 
        • Green Rocker Switch 
      • Castex/Nobles/Tennant Filter Solution Tank (180628)
        Castex/Nobles/Tennant Filter Solution Tank (180628)

        Mushroom shaped stainless steel filter for solution tank.

        • 100 Mesh
        • Stainless Steel 
        • Mushroom Filter
      • Flow Control K‑Valve
        Flow Control K‑Valve

        This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.

        • Withstands pressures up to 500 PSI
        • Easily rebuildable
      • Valve, Drain 1 1/2"
        Valve, Drain 1 1/2"

        1-1/2" Drain Valve including the spout and gasket.

        • Plastic Drain Valve-1-1/2”
        • Includes the Spout and Gasket
      • This gasket fits the 5-5/8" vacuum motors.
        • Foam
        • For use with 5-5/8" vacuum motors
        • Self Adhesive
      View as List Grid

      18 Items

      per page

      Recommended For You