-
![Blower for Phoenix R200]()
Blower for Phoenix R200Replacement blower for Phoenix R200.$298.17 -
![12" x 12" x 1" MERV 11 Pleated Media Filter]()
12" x 12" x 1" MERV 11 Pleated Media FilterThis filter offers superior construction and comes standard on your Phoenix R200 Dehumidifier.- MERV 11, 65% efficiency
- Listed Size: 12 x 12 x 1 inches
- Nominal Size: 11.5 x 11.5 x 0.875 inches
- Standard filter for the Phoenix R200 Dehumidifier
Starting at $23.86
-
![12" x 12" x 1" MERV 8 Pleated Media Filter]()
12" x 12" x 1" MERV 8 Pleated Media FilterThis filter offers superior construction and comes standard on your Phoenix R175 Dehumidifier.
- MERV 8, 30% efficiency
- Listed Size: 12 x 12 x 1 inches
- Nominal Size: 11.5 x 11.5 x 0.875 inches
- Standard filter for the Phoenix R175 Dehumidifier
- Optional filter for the Phoenix R200 Dehumidifier
Starting at $8.47
-
![ThermaStor Condensate Pump (4026333)]()
ThermaStor Condensate Pump (4026333)This 125V pump is commonly used with the Phoenix R175, R200 and Jon-Don R340 dehumidifiers. It is equipped with a 3/8" check valve barb for the outlet and pumps approximately 30 PSI.
- Pre-wired
- Replacement pump element without basin
- Pumps 30 PSI
$143.35 -
![Control Board, Phoenix]()
Control Board, PhoenixPhoenix R175/R200 control board.- Phoenix
- Control Board
- For Use with R175/R200
$371.31 -
![Phoenix Condenser Coil for R200 (4026983)]()
Phoenix Condenser Coil for R200 (4026983)ea Condenser Coil for R200$175.82 -
![Coupler, Female 1/4" Drain Hose]()
Coupler, Female 1/4" Drain HoseThese couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, female body. It can withstand temperature ranges between -40° and 180°F.- 1/4" hose barb
- Female coupling
- For use with Jon-Don R340 and Phoenix R200/R175 dehumidifiers
-
![Lid, Dehumidifier]()
Lid, DehumidifierPlastic Top- Phoenix
- Plastic Lid
- Rotomold Dehumidifier
-
![Hinge, Dehumidifier Lid]()
Hinge, Dehumidifier LidLid hinge.- Phoenix
- Lid Hinge
- Ships Same Day
-
![Coupler, Male 1/4" Drain Hose]()
Coupler, Male 1/4" Drain HoseThese couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.- 1/4" hose barb
- Male insert
- For use with Jon-Don R340 and Phoenix R200/R175 dehumidifiers
-
![Hose, 1/4" Dehumidifier Drain]()
Hose, 1/4" Dehumidifier DrainThis condensate pump vinyl drain hose measures 1/4"ID x 33'L.- Condensate pump vinyl drain hose
- Measures 1/4"ID x 33'L
- Commonly used on Phoenix dehumidifiers
