Phoenix R150 Dehumidifier Replacement Parts
-
![12" x 12" x 1" MERV 11 Pleated Media Filter]()
12" x 12" x 1" MERV 11 Pleated Media FilterThis filter offers superior construction and comes standard on your Phoenix R200 Dehumidifier.- MERV 11, 65% efficiency
- Listed Size: 12 x 12 x 1 inches
- Nominal Size: 11.5 x 11.5 x 0.875 inches
- Standard filter for the Phoenix R200 Dehumidifier
Starting at $29.78
-
![12" x 12" x 1" MERV 8 Pleated Media Filter]()
12" x 12" x 1" MERV 8 Pleated Media FilterThis filter offers superior construction and comes standard on your Phoenix R175 Dehumidifier.
- MERV 8, 30% efficiency
- Listed Size: 12 x 12 x 1 inches
- Nominal Size: 11.5 x 11.5 x 0.875 inches
- Standard filter for the Phoenix R175 Dehumidifier
- Optional filter for the Phoenix R200 Dehumidifier
Starting at $9.26
-
![Coupler, Female 1/4" Drain Hose]()
Coupler, Female 1/4" Drain HoseThese couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, female receptacle. It can withstand temperature ranges between -40° and 180°F.- 1/4" hose barb
- Female coupler
- For use with Jon-Don Ultimate 340 and Phoenix 270HTX/200HT/200Max dehumidifiers
-
![Hose, 1/4" Dehumidifier Drain]()
Hose, 1/4" Dehumidifier DrainThis condensate pump vinyl drain hose measures 1/4"ID x 33'L.- Condensate pump vinyl drain hose
- Measures 1/4"ID x 33'L
- Commonly used on Phoenix dehumidifiers
-
![Lay Flat Ducting, 10 Inch x 250 Feet, 2 mil Thickness]()
Lay Flat Ducting, 10 Inch x 250 Feet, 2 mil ThicknessWhen you need Lay Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!
- 10-inch diameter when expanded
- 16 inches wide when flat
- 2 mil thickness
-
![Coupler, Male 1/4" Drain Hose]()
Coupler, Male 1/4" Drain HoseThese couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.- 1/4" hose barb
- Male coupler
- For use with Jon-Don Ultimate 340 and Phoenix 200Max dehumidifiers
-
![Wheel, 12" Black Rim]()
Wheel, 12" Black Rim12" non marking wheel.- Non Marking Rubber
- 12" Diameter
Shop By
Shopping Options