Please select a Shopping List
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Phoenix R125 Replacement Parts

 Manual/Schematic

View as List Grid

9 Items

per page
  1. 12" x 12" x 1" MERV 8 Pleated Media Filter
    12" x 12" x 1" MERV 8 Pleated Media Filter

    This filter offers superior construction and comes standard on your Phoenix R175 Dehumidifier.

    • MERV 8, 30% efficiency
    • Listed Size: 12 x 12 x 1 inches
    • Nominal Size: 11.5 x 11.5 x 0.875 inches
    • Standard filter for the Phoenix R175 Dehumidifier
    • Optional filter for the Phoenix R200 Dehumidifier

    Starting at $6.55

  2. 12" x 12" x 1" MERV 11 Pleated Media Filter
    12" x 12" x 1" MERV 11 Pleated Media Filter
    This filter offers superior construction and comes standard on your Phoenix R200 Dehumidifier.
    • MERV 11, 65% efficiency
    • Listed Size: 12 x 12 x 1 inches
    • Nominal Size: 11.5 x 11.5 x 0.875 inches
    • Standard filter for the Phoenix R200 Dehumidifier

    Starting at $20.74

  3. Phoenix Power Cord 14Ga (40322315)
    Phoenix Power Cord 14Ga (40322315)
    Power cord fits many Phoenix/Thermastor units.
  4. Phoenix Condensate Pump (4034496)
    Phoenix Condensate Pump (4034496)

    This pre-wired condensate pump by Therma-Stor LLC is designed for use with a selection of the Phoenix line dehumidifiers, including the 200 MAX, 200 HT, 270HTx, as well as the Jon-Don Ultimate 340.

  5. Coupler, Male 1/4" Drain Hose
    Coupler, Male 1/4" Drain Hose
    These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.
    • 1/4" hose barb
    • Male coupler
    • For use with Jon-Don Ultimate 340 and Phoenix 200Max dehumidifiers
  6. Wheel, Phoenix 12"
    Wheel, Phoenix 12"

    Non marking black rubber wheel with plastic rim, measures 12" in diameter with a 1/2" axle hole. Used on many of the Phoenix LGR style dehumidifiers.

  7. Hose, 1/4" Dehumidifier Drain
    Hose, 1/4" Dehumidifier Drain
    This condensate pump vinyl drain hose measures 1/4"ID x 33'L.
    • Condensate pump vinyl drain hose
    • Measures 1/4"ID x 33'L
    • Commonly used on Phoenix dehumidifiers
  8. Coupler, Female 1/4" Drain Hose
    Coupler, Female 1/4" Drain Hose
    These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, female receptacle. It can withstand temperature ranges between -40° and 180°F.
    • 1/4" hose barb
    • Female coupler
    • For use with Jon-Don Ultimate 340 and Phoenix 270HTX/200HT/200Max dehumidifiers
  9. Lay Flat Ducting, 10 Inch x 250 Feet, 2 mil Thickness
    Lay Flat Ducting, 10 Inch x 250 Feet, 2 mil Thickness

    When you need Lay Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 10-inch diameter when expanded
    • 16 inches wide when flat
    • 2 mil thickness
View as List Grid

9 Items

per page

Recommended For You