Phoenix R250 Replacement Parts

This filter offers superior construction and comes standard on your Phoenix R175 Dehumidifier.

This filter offers superior construction and comes standard on your Phoenix R200 Dehumidifier.

When you need Lay Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 10-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

This 125V pump is commonly used with the Phoenix R175, R200 and Jon-Don R340 dehumidifiers. It is equipped with a 3/8" check valve barb for the outlet and pumps approximately 30 PSI.

Phoenix R175/R200 control board.

ea Hex Bolt, 1/4-20x1.75"

Power cord fits many Phoenix/Thermastor units.

Condenser coil

Evaporator Coil for Jon-Don® R340 and Phoenix R250 LRG

12" non marking wheel.

Phoenix dehumidifier thermistor used on R175, R250, 200HT, 270HTX, Ultimate 340, R340

These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, male insert. It can withstand temperature ranges between -40° and 180°F.

Lid hinge.

Plastic Top

These couplers are typically used on the 1/4" drain hoses for most dehumidifiers. This coupler is a 1/4" open flow, Acetal, free float mounting, female body. It can withstand temperature ranges between -40° and 180°F.

Use this un-insulated metalized polyester ducting for both intake and exhaust functions for air scrubbers and dehumidifiers.

This condensate pump vinyl drain hose measures 1/4"ID x 33'L.