Please select a Shopping List

Prospector 300 w/Heat Portable Extractor Replacement Parts

View as List Grid

16 Items

per page
  1. Coupler, 1/4"FPT x 1/4"FQD
    Coupler, 1/4"FPT x 1/4"FQD

    The most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.

    • Double EPDM O-Rings
    • Brass Construction
    • 1/4"
  2. Relief, 12 Gauge Cord Strain
    Relief, 12 Gauge Cord Strain

    Strain Relief 12 Gauge made from heavy duty plastic.

    • Strain Relief 
    • 12 Guage Cord
    • 1/2" Male Thread 
    • Fits Most Portable Extractors 
    • Barb 1‑1/2" x 1‑1/2" Hose
      Barb 1‑1/2" x 1‑1/2" Hose

      Hose Barb  1.5 MPT x 1.5H

      • Hose Barb
      • 1-1/2" MPT x 1-1/2" Hose Barb
      • PVC
    • Ametek 2 Stage Vacuum Motor (116392‑00)
      Ametek 2 Stage Vacuum Motor (116392‑00)

      2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.

      • 2 stage vacuum motor
      • 5-5/8” diameter
      • 80” water lift
      • Lamb # 116392-00
    • Switch, 1" Square Single Throw Rocker
      Switch, 1" Square Single Throw Rocker

      Rocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.

      • Single Throw 
      • Lighted 
      • Green Rocker Switch 
    • ea Blower Gasket
      ea Blower Gasket
      This gasket fits the 5-5/8" vacuum motors.
      • Foam
      • For use with 5-5/8" vacuum motors
      • Self Adhesive
    • Castex/Nobles/Tennant Filter Solution Tank (180628)
      Castex/Nobles/Tennant Filter Solution Tank (180628)

      Mushroom shaped stainless steel filter for solution tank.

      • 100 Mesh
      • Stainless Steel 
      • Mushroom Filter
    • Flow Control K‑Valve
      Flow Control K‑Valve

      This Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.

      • Withstands pressures up to 500 PSI
      • Easily rebuildable
    • Valve, Drain 1 1/2"
      Valve, Drain 1 1/2"

      1-1/2" Drain Valve including the spout and gasket.

      • Plastic Drain Valve-1-1/2”
      • Includes the Spout and Gasket
    • Extension Cord, 25 ft, 12 Gauge (10‑0860)
      Extension Cord, 25 ft, 12 Gauge (10‑0860)
      25' Extension Cord
      • Extension Cord
      • 12/3 x 25'
      • High Visibility Yellow
      • Assembly, Lid and Ring
        Assembly, Lid and Ring

        Prospector hatch and ring assembly

        • 6-1/2" Textured Lid with 'T' Handle
        • Comes with O-ring and Mounitng Ring
        • Works for All Models of Prospector Portable Extractors
      • Pigtail, 6" Power Cord
        Pigtail, 6" Power Cord

        Corded pigtail wire.

        • 14-3 Wire
        • 6" Long
        • Molded Male Plug End
      • Wheel, 10" Rear
        Wheel, 10" Rear

        10" x 1-3/4" rear non-marking wheel.

        • 10" x 1-3/4"
        • Non Marking 
        • "Xtra Soft"
        • Wheel
      • Caster, Prospector® Series Front
        Caster, Prospector® Series Front

        Caster, 3-1/2", non marking wheel.

        • 3-1/2" 
        • Non Marking
        • Ball Bearing Swivel
      • Assembly, Prospector® Series Float Filter
        Assembly, Prospector® Series Float Filter

        Float/filter assembly for the Prospector Series portable extractors.

        • Float and Filter 
        • 1-1/2" Slip Fitting
        • PVC Elbow Comes With Filter
      View as List Grid

      16 Items

      per page

      Recommended For You