Prospector 1200 Hard Surface Extractor Replacement Parts
-
![Relief, 12 Gauge Cord Strain]()
Relief, 12 Gauge Cord StrainStrain Relief 12 Gauge made from heavy duty plastic.
- Strain Relief
- 12 Guage Cord
- 1/2" Male Thread
- Fits Most Portable Extractors
-
![Barb 1‑1/2" x 1‑1/2" Hose]()
Barb 1‑1/2" x 1‑1/2" HoseHose Barb 1.5 MPT x 1.5H
- Hose Barb
- 1-1/2" MPT x 1-1/2" Hose Barb
- PVC
-
![Ametek 2 Stage Vacuum Motor (116392‑00)]()
Ametek 2 Stage Vacuum Motor (116392‑00)2 Stage Vacuum Blower for dual vacuum units. Unit has 5.58” diameter motor with 80” of water lift. This fits many Ninja Deluxe units after serial #C14855 and Ninja Deluxe units with heat after serial #PH2094 and other units containing dual 2 stage motors.
- 2 stage vacuum motor
- 5-5/8” diameter
- 80” water lift
- Lamb # 116392-00
$108.78 -
![Ametek 3‑Stage Vacuum Motor (116565‑13)]()
Ametek 3‑Stage Vacuum Motor (116565‑13)This 3-stage Ametek 5 5/8” dia 90 CFM 112" H2O lift, 10.6A- 3-stage; 10.6 amps
- 5 5/8” diameter
- 99 CFM; 112" water lift
- Lamb #116565-13
$160.72 -
![Coupler, 1/4"FPT x 1/4"FQD]()
Coupler, 1/4"FPT x 1/4"FQDThe most common female quick disconnect for the carpet cleaning industry. The 1/4", brass, female coupler is equipped with double EPDM seals which are resistant to high pressure, high temperature, all but solvent based chemicals and abrasion.
- Double EPDM O-Rings
- Brass Construction
- 1/4"
-
![Coupler, 1/4"FPT x 1/4"MQD]()
Coupler, 1/4"FPT x 1/4"MQDOur most popular male quick disconnect plug! This brass coupler features heavy-duty double O-rings and works in all high-pressure and high-temperature applications.
- Male connection
- Double O-rings prevent leaking
- Brass construction
-
![Assembly, Lid and Ring]()
Assembly, Lid and RingProspector hatch and ring assembly
- 6-1/2" Textured Lid with 'T' Handle
- Comes with O-ring and Mounitng Ring
- Works for All Models of Prospector Portable Extractors
-
![Pigtail, 6" Power Cord]()
Pigtail, 6" Power CordCorded pigtail wire.
- 14-3 Wire
- 6" Long
- Molded Male Plug End
-
![Wheel, 10" Rear]()
Wheel, 10" Rear10" x 1-3/4" rear non-marking wheel.
- 10" x 1-3/4"
- Non Marking
- "Xtra Soft"
- Wheel
-
![Caster, Prospector® Series Front]()
Caster, Prospector® Series FrontCaster, 3-1/2", non marking wheel.
- 3-1/2"
- Non Marking
- Ball Bearing Swivel
-
![Assembly, Prospector® Series Float Filter]()
Assembly, Prospector® Series Float FilterFloat/filter assembly for the Prospector Series portable extractors.
- Float and Filter
- 1-1/2" Slip Fitting
- PVC Elbow Comes With Filter
-
![Cap, Garden Hose]()
Cap, Garden HoseGarden hose cap with o-ring.
- Brass
- Female Garden Hose Thread
- Comes with O-Ring
-
![Unloader, 1200PSI]()
Unloader, 1200PSI1200PSI unloader valve.
- 3/8" and 1/4" Female Fittings
- 8 GPM
- 3600 PSI
- 200° Limit
$158.68 -
![Extension Cord, 25 ft, 12 Gauge (10‑0860)]()
Extension Cord, 25 ft, 12 Gauge (10‑0860)25' Extension Cord- Extension Cord
- 12/3 x 25'
- High Visibility Yellow
-
![Switch, 1" Square Single Throw Rocker]()
Switch, 1" Square Single Throw RockerRocker switch for portables, single throw, rated at 125V, 16 amps. Lighted switch comes with plastic splash guard.
- Single Throw
- Lighted
- Green Rocker Switch
-
![ea Blower Gasket]()
ea Blower GasketThis gasket fits the 5-5/8" vacuum motors.- Foam
- For use with 5-5/8" vacuum motors
- Self Adhesive
-
![Flow Control K‑Valve]()
Flow Control K‑ValveThis Flow Control K-Valve is rated at pressures up to 500 PSI. This part is easily rebuildable.
- Withstands pressures up to 500 PSI
- Easily rebuildable
-
![Valve, Drain 1 1/2"]()
Valve, Drain 1 1/2"1-1/2" Drain Valve including the spout and gasket.
- Plastic Drain Valve-1-1/2”
- Includes the Spout and Gasket
-
![Castex/Nobles/Tennant Filter Solution Tank (180628)]()
Castex/Nobles/Tennant Filter Solution Tank (180628)Mushroom shaped stainless steel filter for solution tank.
- 100 Mesh
- Stainless Steel
- Mushroom Filter
