Ermator S26 Replacement Parts
-
Hose to Wand Connection for Ermator S‑Line Vacuums, 2 Inch (201100125)This 2" hose-to-wand connection fits Ermator S-Line vacuums.
-
Ermator S26 HEPA Single‑Phase Dust Extractor, 120 VoltThis dust collector features dual 120-volt motors that provide extremely high suction. It delivers 258 CFM and 100 inches of water lift, which is more than enough power to handle any small to mid-size planetary floor grinder as well as handheld tools.
- Ideal for use with hand tools, small grinders ,and walk-behind saws
- 120V, 1 phase; 9.0 amps
- 258 CFM; 100" of water lift
- Jet Pulse® filter cleaning technology
- Longopac drop-down dust disposal
$2,638.07 -
Ermator Floor ToolThis 18" floor tool connects to a 2" wand. It is designed to smoothly glide along hard floors.
- 18" width
- Connects to 2" wand, standard on all Ermator units
- Smoothly glides along the floor
- For use with dust collectors and flood extraction units
-
Ermator Hose Assembly, 2 Inches x 25 Feet (201000061)This 2" hose assembly from Ermator fits the S26 and S36 Dust Collectors.$118.00 -
Ermator Twin Hose Kit with Y‑Hose Connector for S26 and S36The Twin Hose Kit allows two operators to simultaneously use hand grinders with a single S26 or S36 Ermator Dust Collector. Grind twice as and rely on a single dust collector!
- Allows two users to run hand grinders with a single S26 or S36 unit
- Comes with hoses and a Y pipe
- For use with the Ermator S26 or S36
$212.00 -
Conical Pre‑Filter for Ermator S26 Dust ExtractorThis conical pre-filter fits the Ermator S26 Single-Phase Dust Extractor.- Stays clog free
- Helps remove more environmental toxins and dust
- Fits all S26 models
$188.00 -
Replacement HEPA Filter for S‑Line Series Ermator Dust ExtractorsThis replacement S-Line HEPA filter fits the Pullman-Ermator S13, S26, and S36 Single-Phase Dust Extractors.- Fits Pullman-Ermator S13 Single-Phase Dust Extractor
- Fits Pullman-Ermator S26 Single-Phase Dust Extractor
- Fits Pullman-Ermator S36 Single-Phase Dust Extractor
- S26 Single-Phase Dust Extractors use two HEPA filters
-
Longopac Replacement Bag (4 PK)The Longopac bagging system makes concrete dust disposal easy and convenient. It attaches to just about any dust collector or vacuum and securely holds all dust and debris.
- 72-foot-long continuous liner
- 5.5 mil thickness
- Makes up to 25-30 bags
- Easily attaches to virtually any dust collector
- Allows for dust-free disposal
$115.00 -
Ermator Flap KitThis flap is is designed to fit the Ermator S13, S26, and S36 dust collectors as well as the C3000 pre-separator.
-
Ermator Switch, S26, S36 (201100151)Replacement switch for Switch, S26, S36 Vacs.
-
Ermator Soft Start 120v Kit (200700531)Soft Start 120v Kit for S2800 Vac$117.00 -
Ermator Two‑Piece Wand (1224035)This rugged aluminum wand attaches to any 2" hose, extending your reach for job cleanup tasks. It disassembles into two pieces for easy storage when not in use. This wand is ideal for use with Ermator dust collectors as well as flood extraction units.
- 2-inch diameter
- Fits Ermator HEPA dust extractors
- Works well for flood extraction jobs
- A must-have for job site cleanup!
-
Ermator S26 and S36 Power Cord (201100149)This replacement power cord fits the Ermator S26 and S36 single-phase dust collectors. Black in color.
- Replacement power cord only
- Fits the Ermator S26 and S36 single-phase dust collectors
- Black in color
-
Ermator Hose Adapter, 2 Inch x 2 InchThis Ermator hose adapter fits into the 2-inch inlet of your Ermator dust collector and connects to a 2 inch hose. This adapter is designed for use with the Ermator S26 and S36 units.
- 2-inch by 2-inch hose adapter
- Fits Ermator S26 and S36 models
- Allows Ermator units to accept larger hoses
-
Replacement Rubber Blade Set for 18‑Inch Ermator Floor ToolThese replacement rubber blades fit the Ermator Floor Tool. Packaged with one long and one slightly shorter blade.
- Includes one long and one short blade
- Long blade measures 17 1/4"
- Short blade measures 15 1/2"
- Designed to fit the Ermator Floor Tool
-
Vacuum Hose Cuff, Fits 2‑Inch Hose x 2‑Inch ToolThis vacuum hose cuff will connect a 2-inch hose to a 2-inch tool or a variety of other 2-inch utility accessories.- Hose cuff
- 2"H x 2"T
-
Front Caster for Ermator S‑Line Dust Collectors (200800152)This front swivel caster wheel fits all Ermator S-Line dust collectors.- Front wheel only
- Fits Ermator S-Line dust collectors
- Sold individually