Dry Air Gale Force Axial Air Mover Replacement Parts
-
![Power Cord for all Dry Air Air Movers]()
Power Cord for all Dry Air Air MoversDry Air fan power cord.
- 14/3 x 20'
- Molded male plug end with ground
- Fits all Dry Air fans
-
![Dry Air Capacitor 10uF Motor (AF‑00E‑PNA10231)]()
Dry Air Capacitor 10uF Motor (AF‑00E‑PNA10231)10uF motor capacitor- Gale Force
- Single Speed
- Motor Capacitor
-
![Dry Air Power Cord DryAir Fan (GN‑00E‑P4A10316)]()
Dry Air Power Cord DryAir Fan (GN‑00E‑P4A10316)Dry Air fan power cord.
- 14/3 x 20'
- Molded male plug end with ground
- Fits all Dry Air fans
-
![Screw for Gale Force® Stand (2 req per stand)]()
Screw for Gale Force® Stand (2 req per stand)ea Screw for Gale Force Stand (2 req per stand) -
![Wire for Gale Force® Stand (2 per stand)]()
Wire for Gale Force® Stand (2 per stand)Wire for Gale Force
- Stand, wire
-
![Gale Force® Stand Quick Release Pin]()
Gale Force® Stand Quick Release PinGale Force Stand Quick Release Pin
- Pin, Quick release
-
![Gale Force® Stand Brackets (2 Pack)]()
Gale Force® Stand Brackets (2 Pack)Gale Force side bracket kit.
- Gale Force
- Side Brackets, Set of 2
- For Use with Pre-2007 Max Force Air Movers
- Stand Sold Separately
-
![Dry Air Foot Rubber Air Mover (GN‑00C‑RNN10006)]()
Dry Air Foot Rubber Air Mover (GN‑00C‑RNN10006)This rubber foot fits Dry Air air movers.- Tempest
- Typhoon
- Force 9
- Clean Force
-
![Dry Air Rocker Switch (GN‑00E‑P3B10218)]()
Dry Air Rocker Switch (GN‑00E‑P3B10218)Single Throw Rocker Switch used on Dry Air single speed fans.
- Single Throw Rocker Switch
- Non-Marked
- Rated at 125 Volts AC
- Used on Dry Air Technology air movers that require just an on/off switch.
-
![Dry Air Well Nut Gale Force® Grill (GN‑00F‑R4A10194)]()
Dry Air Well Nut Gale Force® Grill (GN‑00F‑R4A10194)Gale Force grill well nut.
- Gale Force
- Well Nut
- #6-32
-
![Dry Air Gale Force® Grill, 16" (AF‑00C‑M5A10524(1))]()
Dry Air Gale Force® Grill, 16" (AF‑00C‑M5A10524(1))This 16" wire form grill fits some Dry Air Technology axial air movers. It has three eyelet mounting loops.- 16" wire form grill
- Fits some Dry Air Technology air movers
- Three eyelet mounting loops
-
![Dry Air Gale Force® Rubber Feet (AC‑01T‑ANNN0254)]()
Dry Air Gale Force® Rubber Feet (AC‑01T‑ANNN0254)Easy to install, performance-enhancing rear feet. Points the airflow for greater floor coverage and faster drying. Fits all Gale Force, Clean Force, and Max Force Air Movers.
- Feet, Rear for Gale Force
- The special designed feet can enhance drying by 10 percent as tested by Chuck Dewald
-
![Dry Air Blade Dry Air 6 Fin (AF‑00M‑P4A10270)]()
Dry Air Blade Dry Air 6 Fin (AF‑00M‑P4A10270)Dry Air 6 fin fan blade
- Gale Force
- Clean Force
- 6 Fin
- 16"
-
![Dry Air GaleForce® Daisy Chain Kit (AC‑01T‑E1A10272)]()
Dry Air GaleForce® Daisy Chain Kit (AC‑01T‑E1A10272)Daisy Chain Retro Kit for Gale Force (DA-GF-EA).
- Daisy Chain Retro Kit for Gale Force (DA-GF-EA) Includes Switchplate, Cord, Ground Fault Circuit Breaker, Two-Plug outlet and Power Switch
-
![Dry Air Axial Fan Adapter Kit (F9SBA)]()
Dry Air Axial Fan Adapter Kit (F9SBA)Force 9 stand bracket adapter, set of 2.- For use with Force 9 Air Movers
- For use with Post-2007 Gale Force Air Movers
- For use with Post-2007 Clean Force Air Movers
- Stand sold separately
