Please select a Shopping List
Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Dri-Eaz Revolution LGR Dehumidifier Parts

 Schematic

View as List Grid

12 Items

per page
  1. 3M™ Filtrete (HAF) Filters Dri‑Eaz Evolution & Revolution LGR Dehumidifiers (3 PK)
    3M™ Filtrete (HAF) Filters Dri‑Eaz Evolution & Revolution LGR Dehumidifiers (3 PK)

    This replacement 3M Filtrete High Air Flow (HAF) Filter fits the Dri-Eaz Evolution and Revolution LGR Dehumidifiers. It protects the internal components of your equipment without restricting airflow.

    • Replace after 3 cleanings
    • High air flow (HAF)
    • Utilizes an electrostatic charge to pull contaminants from the air
  2. Dri‑Eaz 7000XLi and Revolution LGR Dehumidifier Condensate Pump (08‑01835)
    Dri‑Eaz 7000XLi and Revolution LGR Dehumidifier Condensate Pump (08‑01835)

    115V condensate pump for the Dri-Eaz 7000XLi and Revolution LGR.

  3. Dri‑Eaz Revolution Duct Attachment Kit (F530)
    Dri‑Eaz Revolution Duct Attachment Kit (F530)

    The Duct Attachment Kit allows you to attach ducting to your Revolution LGR dehumidifier, so you can duct the Revolution's warm dry air into hard-to-reach spaces or specialty drying equipment. This handy kit installs in about a minute with just a Phillips head screwdriver.

    • Allows Revolution LGR to be ductable
    • Includes fasteners, duct rings, and layflat ducting
    • Installs quickly
  4. Dri‑Eaz Power Cord (02‑01614)
    Dri‑Eaz Power Cord (02‑01614)
    DriEaz power cord.
    • Dri-Eaz
    • 25' 14/3 Power Cord
    • For Use with 2800i/7000XLi
  5. Coupler, Male Connector
    Coupler, Male Connector

    Male connector for the drain line assembly for the Phoenix 200, 200 Max, and the Phoenix 300.

    • Coupling insert quick connect (male)
    • Fits .38 tube
  6. Defrost Sensor Cable Assembly for Dri‑Eaz and DrizAir® Dehumidifiers (08‑00260)
    Defrost Sensor Cable Assembly for Dri‑Eaz and DrizAir® Dehumidifiers (08‑00260)

    This defrost sensor cable assembly fits the Dri-Eaz Evolution and 1200 dehumidifiers and the DrizAir 2000 and 2400 LGR dehumidifiers.

  7. Dri‑Eaz Large Rubber Foot (03‑00131)
    Dri‑Eaz Large Rubber Foot (03‑00131)

    This large rubber foot fits all Dri-Eaz air movers and some other models of Dri-Eaz equipment, including the Dri-Eaz DefendAir EX air scrubber. Mounting screw not included.

  8. Lay Flat Ducting, 14 Inch x 250 Feet, 2 mil Thickness
    Lay Flat Ducting, 14 Inch x 250 Feet, 2 mil Thickness

    When you need Lay-Flat Ducting for your air scrubber, negative air machine, or dehumidifier, choose a tough product that holds up over the long haul. This duct comes in a 14-inch x 250-foot roll. Custom-cut just the amount you need and store the rest!

    • 14" diameter when expanded
    • 22" wide when flat
    • 2 mil thickness
  9. Velcro strap 1W X 13L w/ buckle and grommet
    Velcro strap 1W X 13L w/ buckle and grommet
    Velcro strap 1W X 13L w/ buckle and grommet
  10. Tri‑Fold Rivets 3/16" x 5/8"
    Tri‑Fold Rivets 3/16" x 5/8"

    These rivets hold the high-voltage board onto Dri-Eaz dehumidifiers.

View as List Grid

12 Items

per page

Recommended For You