Please select a Shopping List

Metzger/McGuire Armor‑Hard Extreme Concrete Repair, Neutral

Item #
CU-MMAHNAT-EA
Each    Qty: 1
Mfr. Model #
MMAHXK-N
Send to a Friend Add to My Shopping List
  • Fast set allows for foot traffic in 1 hour and normal traffic in 2 hours
  • Wear and impact resistant
  • Low odor
  • 300 cubic inch mortar yield
  • USDA/FDA/LEED acceptable
$141.09
Availability: Typically in stock (Details)
Description

Product Information

Armor-Hard Extreme is a 100% solids, two-component, low-odor, fast-set structural epoxy/epoxy mortar kit intended for use in the structural repair or joints, cracks, and other surface defects in industrial concrete floors. Armor-Hard Extreme provides superior impact and wear resistance.

 

Concrete floors in industrial environments are typically subject to extreme traffic from heavy wheeled carts and machinery. Armor-Hard Extreme’s fast-set chemistry allows for quick return to service. Treated floors are ready for foot traffic in one (1) hour and normal in as little as two (2) hours.

 

Armor-Hard Extreme can be installed in temperatures as low as 20ºF (-7ºC) to as high as +120˚F (49˚C), giving this product a wider application range than competing structural epoxies.

 

This kit includes a specially engineered aggregate blend designed for easy troweling/finishing.

 

USDA/FDA/LEED acceptable.

 

Technical Information

  • Compressive Strength: 12,800 PSI
  • Tensile Strength: 2,000 PSI
  • Flexural Strength: 4,400 PSI
  • Adhesive Strength: Concrete breaks
  • Shore Hardness (D): D92
  • Solids Content: 100%
  • Mix Ratio, By Volume: 5A:1B

 

Typical Uses

  • As a mortar: Large spall repair/rebuilding of joint shoulders
  • As a topping for delaminated slabs: Fill in holes, potholes, gouges, ruts, pop-outs
  • As a liquid: Fill wider random cracks

 

Limitations

This product should not be used in active or moving joints unless a relief joint is formed or saw cut. For deep repairs at warm temperatures, install in max. 1" layers to avoid shrinkage due to exotherm.

 

Note: This product is for industrial use only. Use only in well-ventilated areas. Practice all normal job site safety precautions (ventilated work area, proper safety equipment, etc). Thoroughly read SDS and installation instructions for additional information prior to using material.

Specs

Specifications

More Information
Brand Metzger McGuire
Category Joint and Crack Repair
Color Neutral
Material Concrete
solids (%) 100
Condition New
Manufacturer Model Number MMAHXK-N
Safety Data Sheet (SDS)