Matrix® Finish First Carpet Extraction Detergent Powder
- Tough enough for your worst jobs
- Commercial and residential use
- pH: 10.0-11.0
- Safe for stain-resistant carpet
- Variable dilutions
Choose Finish First to attack the biggest challenges customers throw your way. Special additives allow this formula to penetrate and flush away grease, oil, or water-based grime--even on tough, stain-resistant carpeting!
Grungy, greasy commercial or restaurant carpet can be a cleaner's worst nightmare. Sticky soils can be tough to remove, and if there's any residue left behind, the carpet will re-soil in no time.
To solve this dilemma, Matrix chemists developed a unique combination of additives that penetrate and break down oil and water-based soils, so they can be easily flushed away. They also added outstanding anti-resoiling agents specifically designed to keep carpet cleaner longer.
The fast-acting formula gives carpet the new look your customers love. Although it's strong enough for commercial cleaning sites, it's also safe for use on stain-resistant carpet in residential homes.
Matrix Finish First is a powder that dissolves easily and won't cake up. Built-in defoamers keep your vacuum line clear, and since this formulation contains no corrosive materials, it won't damage your equipment. Plus, because it's waterless and comprised of 100% active ingredients you dilute to use, you'll save on shipping charges.
- Truck Mount: 1.5 pounds per 5 gallons of water for stock solution; meter at 3 GPH
- Portables: 1 to 2 oz of powder per 5 gallons of water
- Yield: 50 pounds makes up to 2,000 ready-to-use gallons; 1.5 pounds makes up to 60 gallons of ready-to-use solution.
Note: For optimum defoaming results, mix and use within 10 hours. After 10 hours, the product will still perform, but its defoaming ability will be diminished.
|pH||10.0 - 11.0|
|Approved Use||Stain Resistant Carpet|
|Chemical Type||Water Based|
|Cleaning Method||Hot Water Extraction|