KRETUS Top Shelf® Epoxy Part A, A‑Resin, Beige
- All-purpose beige Resin (Part A) for Top Shelf ® Epoxy system
- MUST combine with Part B
- Gloss finish, clear or blend with Top Shelf ® Epoxy Colorant
- Kitchens, Garages, Indoor
- 100% solids, VOC compliant
- For professional use only
Description
Product Information
All-purpose resin for Top Shelf® Epoxy, a 100% solids, 2-component system. Blend with Part B and optional Top Shelf® Epoxy Colorant.
FINISH & COLOR
- Gloss
- Beige
ADVANTAGES
- Meets USDA, FDA, SCAQMD, and VOC Standards
- Eligible for LEED Points: Made in California from Partially Recycled Materials
- Adhesion to Concrete, Wood, Metal, Non-glazed Tiles
- Anti-bacterial
- High Traffic & Impact Resistance
- Low Maintenance
- Low Odor
- Moisture Vapor Mitigation (when combined with MVR-EZ or MVR-FC)
- Waterproofing
COMPONENTS FOR STANDARD (1.5-GALLON) KITS:
- Part A: 1 gallon, 1-gallon bucket
- Part B: 1/2 gallon, 1/2-gallon bucket
COMPONENTS FOR BULK (15-GALLON) KITS:
- Part A: 10 gallons, two 5-gallon buckets
- Part B: 5 gallons, 5-gallon bucket
PRODUCT DATA
1. Choose Part A based on the type of application and finish needed.
| PART A | APPLICATION | FINISH | MIX RATIO |
| A-RESIN | • all-purpose (crack & joint repair, prime, base, body, cap, or top coats) | high gloss | A:B = 1 gal: 1/2 gal |
| CAST-RESIN | • molds, casts, jewelry, countertops | high gloss | A:B = 1 gal: 1/2 gal |
| COVE-RESIN | • wall cove • crack & joint repair |
high gloss | A:B = 1 gal: 1/2 gal |
| CR-RESIN | • chemical-resistant top coat when combined with MVR-FC or FAST • lower viscosity, stronger chemical bonds than A- and LG-Resins |
high gloss | A:B = 1 gal: 1/2 gal |
| LG-RESIN | • all-purpose (crack & joint repair, prime, base, body, cap, or top coats) | low gloss | A:B = 1 gal: 1/2 gal |
| T-RESIN | • terrazzo system, use with manufacturer-approved aggregate | high gloss | A:B = 5 gal: 1 gal |
2. Choose Part B based on climate (temperature and humidity), deadline/schedule, and applicator’s skill level.
| PART B | DESCRIPTION/SKILL LEVEL | MVER (ASTM F1869) RH (ASTM F2170) | RECOMMENDED APPLICATION TEMPERATURE | WORKING TIME | RECOAT TIME | RETURN TO SERVICE | FULL CURE |
| MVR-EZ | • moisture vapor resistance • easy to apply, long working time • for beginner installers and at high temperatures |
25 lbs 99% |
60-95°F | 25-30 min | 8.5-24 hrs | 24 hrs | 7 days |
| MVR-FC | • moisture vapor resistance • fast cure • for expert installers and at low- to mid-temperatures |
25 lbs 99% |
41-77° F |
15 min | 3-16 hrs | 5-6 hrs | 5 days |
| EZ | • easy to apply, long working time • for beginner installers and at high temperatures |
10 lbs 80% |
60-110° F |
40-50 min | 9-36 hrs | 24 hrs | 7 days |
| AP | • average working and cure times • for experienced installers and at low- to mid-temps |
10 lbs 80% |
60-95° F |
25-35 min | 7.5-36 hrs | 24 hrs | 7 days |
| TH | • traditional hardener | 10 lbs 3% |
60-80° F |
20-25 min | 8-24 hrs | 24 hrs | 7 days |
| FAST | • fast cure • for expert installers and at low- to mid-temps |
10 lbs 80% |
41-85° F |
15-20 min | 5.5-24 hrs | 10 hrs | 5 days |
Specs
Specifications
| Material | Architectural|Concrete|Epoxy|Floor|Metal|Walls|Wood |
|---|---|
| Category | Resinous Coatings |
| Gloss | High |
| Brand | Kretus |
| Grit | Can broadcast into (Anti-Slip, chips, quartz, sand, aluminum oxide) |
| VOC Level | <1 g/L |
| Type | Epoxy |
| Condition | new |
| solids (%) | 100% |
Safety Data Sheet (SDS)