KRETUS® Polyaspartic 85 Part B
- Part B for Polyaspartic 85 EZ, Fast, or XFC system
- MUST combine with Part A (EZ, Fast, or XFC)
- Gloss finish, clear or blend with Poly Colorant
- Kitchens, Coolers, Garages, Indoor/Outdoor
- 85% solids, VOC compliant, High Chemical Resistance
- For professional use only
Description
Product Information
This is the mix-and-match component of Polyaspartic 85-an 85% solids, 2-component system with high UV resistance. In hot application temperatures, combine with Polyaspartic 85 EZ Part A. In cold application temperatures, combine with Polyaspartic 85 Fast Part A. In cold to freezing application temperatures, combine with Polyaspartic 85 XFC Part A.
FINISH & COLOR
- Gloss
- Clear or blend with Poly Colorants
ADVANTAGES
- Meets USDA, FDA, SCAQMD, and VOC Standards
- Eligible for LEED Points: Made in California from Partially Recycled Materials
- Adhesion to Concrete, Wood, Metal, Non-glazed Tiles
- Anti-bacterial
- High Traffic and Hot Tire Resistance
- Low Maintenance
- UV Resistant
- Waterproofing
COMPONENTS FOR STANDARD (2-GALLON) KITS: Cold to Freezing Application Temperatures
- Part A: 1 gallon Polyaspartic 85 XFC, 1-gallon bucket
- Part B: 1 gallon Polyaspartic 85, 1-gallon bucket
COMPONENTS FOR BULK (10-GALLON) KITS: Cold Application Temperatures
- Part A: 5 gallons Polyaspartic 85 XFC, 5-gallon bucket
- Part B: 5 gallons Polyaspartic 85, 5-gallon bucket
Specs
Specifications
| Material | Architectural|Floor|Metal|Wall Cove|Walls|Wood |
|---|---|
| Category | Resinous Coatings |
| Gloss | High |
| Brand | Kretus |
| Grit | Can broadcast into (Anti-Slip, chips, quartz, sand, aluminum oxide) |
| VOC Level | <100 g/L |
| Type | Polyaspartic |
| Condition | new |
| solids (%) | 85% |
Safety Data Sheet (SDS)