KRETUS® Polyaspartic 85 Part A, Fast Clear
- Fast-cure component (Part A) for Polyaspartic 85 Fast system
- MUST combine with Part B
- Gloss finish, clear or blend with Poly Colorant
- Kitchens, Coolers, Garages, Indoor/Outdoor
- 85% solids, VOC compliant, High Chemical Resistance
- For professional use only
Description
Product Information
Fast-cure component of the Polyaspartic 85 Fast system. Must combine with Part B. The UV-resistant, 2-component, 85% solids system is best installed at low temperatures in areas with low relative humidity. At full cure, it withstands extreme temperatures from 0 to 200°F (-17 to 93°C).
FINISH & COLOR
- Gloss
- Clear or blend with Poly Colorants
ADVANTAGES
Meets USDA, FDA, SCAQMD, and VOC Standards
Eligible for LEED Points: Made in California from Partially Recycled Materials
Adhesion to Concrete, Wood, Metal, Non-glazed Tiles
Anti-bacterial
Extreme Temperature Resistance: 0-200°F (-17-93°C)
Fast Cure
High Traffic and Hot Tire Resistance
Low Maintenance
UV Resistant
Waterproofing
COMPONENTS FOR STANDARD (2-GALLON) KITS:
- Part A: 1 gallon Polyaspartic 85 Fast, 1-gallon bucket
- Part B: 1 gallon Polyaspartic 85, 1-gallon bucket
COMPONENTS FOR BULK (10-GALLON) KITS:
- Part A: 5 gallons Polyaspartic 85 Fast, 5-gallon bucket
- Part B: 5 gallons Polyaspartic 85, 5-gallon bucket
Specs
Specifications
| Material | Architectural|Floor|Metal|Wall Cove|Walls|Wood |
|---|---|
| Category | Resinous Coatings |
| Gloss | High |
| Brand | Kretus |
| Grit | Can broadcast into (Anti-Slip, chips, quartz, sand, aluminum oxide) |
| VOC Level | <100 g/L |
| Type | Polyaspartic |
| Condition | new |
| solids (%) | 85% |
Safety Data Sheet (SDS)