HydraMaster Hydra‑Dri Truck Mount Extraction Detergent

Dilution:

• In truck mounts mix 1 - 1½ pounds of Hydra-Dri into 5 gallons of warm water to make a stock solution. Reduce flow meter to 3 when cleaning advanced generation carpet.

• In portables, mix 1 - 2 ounces of Hydra-Dri into 5 gallons of water.

Nylon Carpet Cleaning:

Nylon fibers are the highest percentage of fibers found in residential carpeting. Nylon is usually factory treated with a stain repellant making it easier to clean. Nylon fibers are attracted to acid dyes, making spills such as Kool-Aid a problem. Stain-resistant warranties from the manufacturers dictate that nylon should not be cleaned with a pH greater than 10.0.

Recommended Basic Method:

1. Vacuum carpet thoroughly.
2. Dilute pre-spray (traffic lane cleaner) into a pump-up or inline sprayer and spray onto all traffic lane areas.
3. Use a groomer to groom in the pre-spray and allow a 10-minute dwell time. Do not allow pre-spray to dry on carpeting.
4. Put diluted detergent into carpet extractor and clean carpet.
5. To neutralize carpet, dilute an acid rinse into a pump-up sprayer, inline sprayer, or extractor and apply to carpet.
6. Apply 3M Scotchgard diluted at 32 oz per gallon of water to carpet with a sprayer.
7. Groom carpet to evenly spread protector onto all sides of the fiber.
8. Set air movers in room to speed dry carpet.