Fiberlock IAQ 8000 HVAC Insulation Coating (5 GL)
- Coverage: 75-175 sq ft per gallon
- Goes on white, dries white
- For use on lined and/or unlined duct work
- Contains EPA-registered fungicide
Product Information
Fiberlock IAQ 8000 is a white, dual-purpose, high-performance coating designed to penetrate and reinforce duct liner or duct board insulation materials.
It can also be used to seal unlined duct work to prevent microbial particulate from becoming airborne.
IAQ 8000 is a non-flammable, water-based formulation that forms a flexible membrane in duct liner insulation materials. It is high in viscosity to provide maximum binding ability on insulation materials.
Manufactured from premium acrylic resins to allow for optimal durability and flexibility, necessary for air duct environments. Fiberlock IAQ 8000 contains an EPA-registered fungicide to prevent mold from growing on the surface of the cured film.
Successfully tested to ASTM standard C- 411 “Hot Surface Performance of a Coating on Glass Fiber Blanket Insulation.” ASTM E-84 Class “A” fire rating. Meets requirements of NFPA 90A/90B standard.
Usage
Application Information
Brush, roll or airless sprayer
- Airless Spray settings:
- Pressure: 3,000 PSI
- Hose length: 50 feet
- Hose diameter: 1/4 inch
- Tip size: 0.019 - 0.023
Additional Info
- Solids by weight: 52 +/-2%
- Volatile: Water
- Average particle size: 0.2 microns
- Viscosity at 77°F: 110-120 KU
- Weight per gallon at 77°F: 10.2 lbs
- Film Hardness: Excellent
- Film Flexibility: Excellent
- Impact Resistance: Excellent
- Water resistance dry film: Excellent
- Bridging effectiveness: Excellent
- Application:
- Brush, roll
- Airless Paint Sprayer
- Sprayer settings:
- Pressure: 3,000 PSI
- Hose length: 50 feet
- Hose diameter: 1/4 inch
- Tip size: 0.017 - 0.023
- Fan size: 12 inches
- Flash point: Non-combustible
- Dry Time: 1 - 2 hours
- Shelf Life at 77°F: 36 months min (original factory sealed containers)
- Odor: Indoors, virtually odorless
Specifications
| Brand | Fiberlock |
|---|---|
| Category | Encapsulant/Coating |
| Color | White |
| Approved Use | HVAC System, Mold Remediation |
| Max Coverage Per Gallon | 175 |
| Application | Mold Remediation |
| pH | 8.5 |
| Condition | new |
| Xactimate Code | PNT DCTLF - Prime and paint ductwork - hot or cold air (by linear foot) |