This is a handle locking assembly link for the RX-20. Four are required (each sold separately.) Located at the bottom of the adjustment rod, these four links connect the adjusting nut to the base assembly of the RX-20.
There are four (4) links used to connect the adjusting nut to the base of the RX-20. Take care when removing the clevis and cotter pins because these can be reused if not broken or damaged. If damaged these items can be purchased from a local hardware store, the clevis pin is 1/4" x 7/8" and the cotter pin will depend on the size of lock out hole in the clevis pin.
|Category||Power Wands, Rotary Extraction Machines|
|Manufacturer Model Number||000-107-097|