The Dri-Eaz DriTec 4000i is an intelligent desiccant dehumidifier designed for high-performance drying.

From its intelligent controls to its built-in humidistat and real-time temperature, pints-per-day, and RH display, the DriTec 4000i Desiccant is one of the smartest and best-performing desiccant dehumidifiers on the market today.

This compact powerhouse is 33% smaller than its closest competitor. Thanks to its small footprint, large semi-pneumatic wheels, and the fact that it can be operated on its back, you can fit the DriTec 4000i into crawlspaces and other cramped, low-clearance areas. The rugged vacuum-molded back panel protects the unit when running on its back, so you don't have to worry about scratches, chips, and dents.

The Dri-Eaz DriTec 4000i Desiccant is ideal for use in cold environments and those with low relative humidity. It is especially effective at pulling bound water out of dense materials, such as hardwoods, plastic, and brick, and construction assemblies, including walls, stairs, and cabinetry.

Long after refrigerant dehumidifiers can no longer operate efficiently, the DriTec 4000i will continue to remove moisture down to 0% RH. This unit removes up to 118 pints per day at AHAM (80°F / 60% RH).

The DriTec 4000i is the only restoration desiccant equipped with positive thermal coefficient heaters, which promote better efficiency, safety, and longer life.

The inlet and process outlets on the DriTec Desiccant can be easily ducted for specialty drying jobs. A handy ducting setup guide can be found on the inside of the lid, so there's no guesswork for your crew while out on a job.

A built-in compartment on the top of the unit provides secure storage for power cords and ducting. This helps to further minimize space taken up in your van or storage facility.

Included accessories:

• Reactivation Out duct ring
• Reactivation Out heat-resistant ducting
• Air inlet duct ring
• Process air outlet adaptor assembly
• Two 25-foot power cords

Key Specifications:

• Power: 115V / 60 Hz
• Amps (at 80°F / 60% RH): Circuit 1: 12; Circuit 2: 12
• Process air: 395 CFM
• Reactivation air: 65 CFM
• Water removal (at 80°F / 60% RH): 118 pints/day | 55.8 L per day
• Dimensions: 33.13 x 21.14 x 20.25 inches; with handle upright, height is 42.25" | 54.15 x 53.7 x 51.4 cm; with handle upright, height is 107.3 cm
• Weight: 95 lbs | 43 kg
• Air filter: 3M HAF
• Safety: ETL listed to CSA dehumidifier standards