Concrobium® Calcium, Lime & Rust Remover, 32 oz
Product Information
Concrobium® Calcium, Lime & Rust Remover is a non-corrosive, readily-biodegradable solution that safely and effectively removes calcium, lime, rust, and hard water stains with no toxic fumes. It's also septic safe.
Recommended Uses
The solution is ideal for porcelain, acrylic, fiberglass, stucco, brick, cement, glass, chrome, and stainless steel. Test on an inconspicuous section first. Note: May etch older surfaces. This solution may also return older cement to its original white appearance. Rinse thoroughly with water after use.
Do Not Use On: natural stone, marble, terrazzo, colored grout, painted/metallic glazed surfaces, plastic laminates, Formica®, aluminum, pewter, copper, brass, zinc, steam irons, refinished tubs, or any damaged or cracked surfaces.
Powerful cleaning formulation that is:
- Non-corrosive
- Free of VOCs
- Biodegradable
- Septic safe
Usage
How to apply
Always test on an inconspicuous section first.
Spray directly on surface and wipe with brush or sponge as required. Rinse thoroughly with water. For tough stains allow product to dwell on the surface for a maximum of 2 minutes, then proceed as directed above. Repeat if necessary.
To descale: mix 1 part Concrobium Calcium, Lime & Rust Remover to 8 parts water. Rinse thoroughly. Repeat if necessary.
Specifications
| Material | Cement|Chrome|Fiberglass|Glass|Porcelain|Stainless Steel |
|---|---|
| Category | General Odor Control Chemicals |
| pH | 1.0 - 2.0 |
| Brand | Concrobium |
| Application Method | Spray |
| Type | Liquid |
| Condition | new |
| Manufacturer Model Number | 628-257 |