Please select a Shopping List

Blastrac 2‑20D™ KII Three‑Phase Shot Blaster, 460V

Item #
Mfr. Model #
Send to a Friend Add to My Shopping List
  • 20" blast pattern; prepares up to 4,850 sq ft per hour
  • Ideal for medium to large industrial jobs
  • Forward and reverse self-propelled operation
  • AC inverted drive-motor for work on ramps and inclines
  • Operates virtually dust-free
Availability: Typically in stock (Details)

Product Information

Strip, Clean, and Profile in One Easy Step!

This Walk-Behind Self-Propelled Shot Blaster Is Ideal for Medium to Large Jobs!


Easy Surface Prep in One Step

The Blastrac 2-20DTMKII is ideal for improving traction and skid-resistance as well as preparing concrete surfaces prior to the application of paint and coatings. It strips, cleans, and profiles both concrete and asphalt in one easy step for maximum labor and time savings.


Self-Propelled Design, Easy Operation

The Blastrac 2-20DTMKII features forward and reverse self-propelled operation, which results in improved productivity plus a more even and consistent blast pattern and surface profile.


Consistent Performance—Even on Ramps and Inclines!

The Blastrac 2-20DTMKII has an AC Inverted drive-motor with integrated brake, helps maintain speed on ramps and inclines, making it the ideal choice for restoring skid resistance and traction in parking garages or on warehouse floors. This also improves your productivity as it generates a more even and consistent blast pattern and surface profile.


High Productivity in a Compact Package

The Blastrac 2-20DTMKII features a heavy-duty blast wheel drive system powered by twin 15 HP motors. With a 20” blast pattern, this unit can prepare up to 4,850 square feet per hour, consuming abrasive at about 1.6 lbs per 108 square feet or 78 lbs per hour.  


A convenient slide-out screen in the shot hopper facilitates the removal of large debris, making it easy for the operator to clear obstructions quickly and efficiently.


Easy to Control, Easy to Transport

The Blastrac 2-20DTMKII weighs 1,268 lbs, but, thanks to a quick-lift rear caster assembly, transports easily to, from, and around the job site.


The highly visible, easy-to-use control panel is located within easy reach. Even with minimal training, new operators can position the unit into place and start achieving great results.


Power and Safety

The Blastrac 2-20DTMKII operates on 460V, 3-phase power. All electrical components and panels are UL certified for operator safety.


Perfect for Industrial and Commercial Jobs

The Blastrac 2-20DTMKII is ideal for medium to large jobs in industrial settings, warehouses, factories, roads and bridges, retail stores, and supermarkets. This shot blaster is also suited for road and airport maintenance, asphalt blasting, decontamination, and more. 


Low-Dust, Cleaner Job Sites

When connected to the appropriate dust collector, the Blastrac 2-20DTMKII operates virtually dust-free, ensuring you can achieve the desired surface profile while complying with OSHA dust regulations.



  • Blasting Width: 20"
  • Travel Speed: Up to 108 ft/min
  • Productivity: Up to 4,850 sq ft  per hour on concrete
  • Type: Backward (Pull)
  • Abrasive Consumption: 1.6 lbs per 108 sq ft / 78 lbs per hour
  • Blast Motor: Twin 15 HP
  • Voltage: 460V, 60 Hz
  • Amperage: 44 amps
  • Power Cord: 65 feet
  • Dust Hose Connection: 6"
  • Dimensions: 77" L x 28" W x 55" H
  • Weight: 1,268 lbs


Note: Not available in all states. Call 800-400-9473 to check availability.



More Information
Volts 460
Amps 44
Blasting Width 20 Inch
Vacuum Hose Diameter 6 in.
Production Rate Up to 4850 sq.ft/hr
Cord Length 65 ft.
Brand Blastrac
Category Shot Blasters
Condition new
Manufacturer Model Number 970554601
Manual / Schematic