Betco Crete Rx™ Stain Defense Penetrating Sealer (5 GL)
- Penetrating polymers seal off open pores
- Resists staining and etching
- pH: 10.0–11.0
- Interacts with Sealant Infused Polymers
- Coverage: 3,500 to 4,000 sq ft per gallon
Prevent Stains and Etch with Betco Crete Rx Stain Defense
This penetrating sealer fills porous concrete, helping it to resist stains and etch damage. It interacts with Sealant Infused Polymers to create a continuous, uniform protective surface.
Stain Defense is easy to apply and offers generous coverage rates—up to 4,000 square feet per gallon—making it a great choice not only to protect your polished concrete floors but to also your budget!
- Clean entire area with Betco Crete Rx Densiclean. Allow floor to dry prior to application.
- Apply Betco Stain Defense at proper application rate, 3,500–4,000 sq ft/gallon, with a low-pressure sprayer. Spread with a microfiber applicator or mop and bucket application.
- Allow dry to touch for 30–45 minutes, then high speed burnish with Betco Crete Rx SI Burnish Pad.
- Allow 1–2 hours cure time before floor is exposed to full traffic.
|10.0 - 11.0